0
They are both coil springs, a lowering spring is shorter and usually has a thicker coil stock or more coils. Also with lowering spring you are set to one high as with coilover you can change your height whenever you want. also with lowering spring you have to buy new struts where the coilover usually come pre assembled with the struts.
What else can I help you with?
Can you adjust for the front to go up more or for the back to go down?
Yes, you can adjust the front of a vehicle to go up more or lower the back by modifying the suspension. This can be done by using adjustable coilovers, air suspension systems, or by changing the springs and shocks. Additionally, you can also use spacers or lowering kits to achieve the desired height. However, it's important to ensure that any adjustments maintain proper alignment and handling characteristics for safety.
What is the difference between volcanic island and limestone island?
volcanic islands have black sand beaches, have sulfur springs and have fertile soil, but limestone islands have white sand beaches, have little or no sulfur springs, and the soil is not as fertile as volcanic islands.
What are the different heights of box springs?
Standard "high profile" box springs are 9 inches (23 cm) in height, whereas "low profile" box springs are between 5 inches (13 cm) and 6 inches (15 cm)
What is the largest hot springs in the world?
Glenwood Hot Springs
What is the name of the city in the movie cars?
Radiator Springs is the town, but it's not a real place.
Will 99 Ford Mustang Lowering Coilover fit a 1995 mustang?
If you are refering to just the springs, then yes, lowering springs from a 1995 mustang will fit a 1999 or vice versa. However, full coilovers meant for one year will not fit another.
How do you lower a Scion TC?
To lower a Scion tC, you can install lowering springs or coilovers, which reduce the ride height by replacing the factory suspension components. Lowering springs provide a fixed drop, while coilovers offer adjustable height for customization. Ensure you also consider a proper alignment after installation to maintain handling and tire wear. Additionally, check for compatibility with your specific model year, as suspension designs may vary.
When lowering a 2001 gti by 2 inches do you need to replace the sway bar or just the links and where would you buy these parts from?
You don't need to replace any of that. Just get yourself a good set of coilovers ($$$) or opt for springs which won't get you as low as coilovers, but still look good.
How can you lower the suspension on your 99 vw Cabrio?
Cutting springs ,or buy coilovers
Can lowering springs cause bounce?
Lowering the springs of a car will cause the tires to bounce.
How do you lower a transit connect?
To lower a Ford Transit Connect, you can install lowering springs or adjustable coilovers, which reduce the vehicle's ride height. Another option is to use drop spindles in conjunction with lowering springs for a more controlled drop. Additionally, ensure that any modifications comply with local regulations and do not negatively impact the vehicle's handling or alignment. Always consult a professional for installation to ensure safety and proper fitment.
What do you need to lower your car other than lowering springs?
New shocks, rear sway bar, front strut bar. On most car a camber kit is recommened. Also need to get an alignment after it's lower If you have about one grand you can get some coilovers.
Can you still replace shocks and stuts if your car has coilovers?
Coilovers are a replacement (usually an upgrade) for a car that has a Strut Type setup. Coilovers contain a damper and a spring (Coiled "over" the damper).That being said you can replace or change the springs or spring rates on your Coilovers. In addition you can replace or change the dampers on some of the more expensive Coilovers.So to answer you original question, you can not replace shocks and/or struts on a car equipped with Coilovers. Apples and oranges - they are both fruits but not the same kind.Hope this helps.
Where can you buy lowering springs?
WWW.DashZracing.com
Will lowering springs from a 95 v6 camaro work for a 93 z28?
They might fit but there is a difference in the weight of the two cars. The Z28 will be heavier in the front due to the V8, so it may affect the handling. The Z28 springs should be stiffer to handle the weight difference.
Can you put lowering springs with regular struts?
yes
What is the difference between artesian springs and other springs?
Some springs have put many years of effort into their craft in order to become artesian.
