The Transformers The Movie was an animated movie with a USA release date of August 8 1986 see related link. Transformers was also the title for a 2007 Live action Film that was the first in a series of three films see related link
Rated r
What date was the first PG-13 rated movie ever seen in a theater? What was the movie?
Madagascar (2005) - the first movie is rated PG.
No
Henry & June
Bumblebee
ironhide
You cannot 'change' the 'rated power' of a transformer except by changing the transformer for another one. You can, though, operate the transformer below its rated power or, for short periods of time, operate the transformer aboveits rated power.
The correct symbol for kilovolt amperes is 'kV.A, not kva. A volt ampere is the product of the transformer's secondary rated voltage and its rated current. It is not rated in watts, because the transformer designer has no idea what sort of load is to be applied to the transformer, and it is the load that determines the amount of watts, not the transformer.
The product of the secondary rated current and the secondary rated voltage will give you the rated V.A of the transformer.
Presumably you are asking about the rated secondary current of a transformer rated at 2200 kV.A?This depends on the rated secondary voltage. You divide the rated apparent power of the transformer by the rated secondary voltage.Of course, the actual current depends on the load.
The ratings state the limits on voltage and current for operating the transformer at full load. The rated voltage times the rated current gives the rated VA of the transformer. Transormers are not usually rated directly for power because this depends on the power factor of the load applied.
This is the rated output of the transformer, obtained by multiplying the rated secondary voltage by the rated secondary current. And it's 'kV.A', not 'kva'.
What date was the first PG-13 rated movie ever seen in a theater? What was the movie?
Madagascar (2005) - the first movie is rated PG.
Hi, First understand one thing seriously!! The transformer only can be rated in KVA. Bcoz, its power factor not depends on the load connected.
if your talking about the 1st movie ever made like in the 60s NO if not yes
There is no 'standard' output current from a transformer. The secondary (output) current depends on the load, and should not exceed the rated secondary current. To find the rated secondary current, you divide the transformer's rated volt amperes by the rated secondary voltage. The above cited answer need more descriptive ; a) V/Z = I, b) V/Z = I + Magnetizing current of the transformer taken from Primary side of the transformer.