0
What else can I help you with?
What does header mean in electronics?
A header is a type of electrical connector. It usually consists of one or more rows of male pins.
What is a Jones plug?
A Jones plug is a type of connector for cable to cable or cable to panel interconnections. Most of the housings are rectangular, the pins are flat blades. Cinch makes two versions of these connectors. Other manufacturers may also make similar product.s
Tail and dash lights dont work on 1990 gmc truck. Changed the fuse. What else could it be?
Nonworking LightsSince the fuse has been replaced [and I hope the new fuse is "good," and has not "blown], that suggests the cause is an "open circuit" condition. Usually, open circuit conditions are caused most commonly by:A wiring harness connector has become "unplugged," orCorrosion has built up on the metallic connector pins INSIDE a connector or any type of connection,A conductor [wire] has been broken or cut.There are probably a few more possible causes which I can't recall, but these are the most common.
What type of rock is granite from the three types?
igneous
What is a GCF accordion?
A GCF accordion is a type of button accordion. What GCF means is that on the right hand side of the accordion (where you play the melody line) there should be three rows of buttons. One row plays notes in the key of G, one in the key of C, and one in the key of F. This means that you can play songs that are in those three keys. To understand what I mean by "keys," you need to know a little bit about music theory. Think about it as if you were playing three different guitar chords, G, C, and F. Well, for the GCF accordion it is the same except with buttons to press instead of strings.
What does header mean in electronics?
A header is a type of electrical connector. It usually consists of one or more rows of male pins.
What type of connector does a SVGA Cable Use?
15 pin, 3 rows
What does a cabinet Description DB 15 mean?
A cabinet with a Description DB 15 typically refers to a type of connector used in older computer systems, commonly found in VGA monitors. The DB 15 connector has 15 pins arranged in three rows and is used to transmit analog video signals between devices such as computers and monitors.
What is a db 25 port?
A DB-25 port is a type of connector that has 25 pins arranged in two rows. It was commonly used for serial and parallel interfaces on older computer equipment such as printers, modems, and early networking devices.
What are the three types of mini pci cards how many pins does each type card have?
Type I, Type II (which have 100 pins) and Type III (which has 124 pins). (side-note from Kimberly) just to clarify because I didn't get it at first, Type I AND type II both have 100 pins lol. 6th Edition, Pages 1110
What is a VGA-PORT?
A socket in a computer for connecting up a monitor. VGA stands for Versatile Graphics Adapter and is the standard for outputting video data to a monitor. It has a standard 'D' type plug with 15 pins, arranged in three rows of five.
How could you recognize parallel and serial port of computer?
Parallel ports typically have 25 or 36 pin ports. Serial ports, by contrast, have only 9 pins. Both type of ports have two rows of pins.
What type of power outlets are commonly used in Argentina?
In Argentina, the most commonly used power outlets are Type C and Type I. Type C outlets are two round pins, while Type I outlets are three flat pins in a triangular configuration.
What are the 25 pin plug-ins on the back of your computer for and what are they called?
there are 2 diffferent styles of the 25 pin connectors on the back of a pc. One is called the male gender which can be identified by gold colored pins sticking out and are layed out in 2 rows- top row has 13 pins and second row has 12 pins. the other style is layed out the same way,however, it is called the female gender and all you can see is 25 holes instead of pins. The male connector is used for "serial" type of communication where the coded information is sent to another device using 1 wire in the cable to send information and 1 wire to receive information from another device. the other wires in the connector are used for control of data back and forth between devices. This was the first way devices communicated bi-directionally with each other. The female connector is used for "parallel" style communication and is usually only used to send data to a printer.
What does TV out mean?
Normally, a connector marked as TV out is an output that carries video and audio signals for connection to another device. The connector type can vary but it is likely to be three RCA connectors or an HDMI connector.
What is an xlr cable?
XLR refers, not to the cable (wire) per se, but actually to the type of connector used. An XLR connector has 3-pins and is used primarily in audio. Professional microphones and other audio equipment use it. Of the three pins, two are for the balanced signal, and one is for the shield. The wire used then is a two conductor shielded cable using a braided wire or a foil shield. So, an "XLR cable" refers to a two conductor, shielded cable with XLR connectors on each end.
What type of plug sockets are used in Brazil?
In Brazil, the type of plug sockets used are Type N sockets, which have three round pins in a triangular pattern.
