-- PSK
-- DPSK
-- 16, 32, 64, 128, and 256 QAM
pam ppm pwm
psk etc can be used
There are 3 main types of digital pulse modulation:Pulse time modulation (PTM), somewhat similar to analog phase modulation.Pulse width modulation (PWM), the width of the pulse represents the signal.Pulse code modulation (PCM), serial transmission of binary bits forming numeric or character codes that represent the signal.All of these can be modulated on an RF carrier using any of the standard modulation techniques: AM, FM, Phase Modulation, etc. One advantage with AM digital pulse modulation techniques over AM analog is that the carrier can be 100% modulated, which cannot be done with analog, thereby allowing significant reductions in transmitter power without loss of coverage range. Sometimes FM digital pulse modulation techniques are referred to as Frequency Shift Keying (FSK). A very complex method of combining Phase Modulation and AM to increase the bit density of digital pulse modulation on an RF carrier is called Quadrature Amplitude Modulation (QAM).
Three different modulating techniques are emploed to provide digital television (i.e. satellite, cable, UHF ) and these are known as DQPSK, QAM and COFDM. Each technique is a variation of phase modulation. QAM also takes advantage of amplitude as well as phase changes.
Because in order to preserve the original sound, a digital sampling rate must be twice the frequency of the analog signalAnalog data is smooth and continuous, where as digital data, such as the binary data used in computers, has distinct gradations. The process of producing digital data by measuring data at a series of representative points is called sampling.
PAM-pulse Amplitude Modulation It encodes information in the amplitude of a sequence of signal pulses. PPM-Pulse Position modulation PWM-Pulse Width Modulation.It results in variation of average waveform.
Yes, it is.
How to Generate digital data for bpsk modulation?
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Simply put, digital modulation is designed to maximize the amount of data we can put through a system per unit of time while maintaining the integrity of that data. Those are the two primary goals.
Delta modulation is not a type of quality conversion and runs on digital-to-analog, analog-to-digital. Differential pulse code modulation has a higher quality of conversion and runs on a 1-bit data stream.
Modulation
presentation of analog digital hybrid modulation
This is hard to explain. AM means amplitude modulation, while ASK is amplitude-shift keying. AM is usually analog as it is modulated based on the strength of the signal, though you can use it to send a digital signal. ASK represents digital data as variations in the amplitude of a carrier wave. Any digital modulation technique will represent the data using a finite number of different signals. While AM is used mostly for radio and television, ASK is used for telegraph signals, transmission across telecommunications equipment, and fiber optics.
No, Pulse Code Modulation is a communication method used to carry digital data but is not part of any analog to digital conversion. PCM is often used to carry audio data as a digital stream and therefore is the encoding used as the signal is first converted to a digital format.
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation