answersLogoWhite

0


Best Answer

Either you have a short or your circuit is severly overloaded. Either way call an electrician. It sounds like you have a fire hazard.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does my house breaker turn off everytime you turn on the light?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Movies & Television

I have halogen lights in the bathroom one day they kept flashing on and off and now dont come on at all if you try to switch them on the trip switch for all lights in the house goes off If you turn?

halogen lights get very hot. bath rooms are very damp places. there may be a thermal breaker built in to the light that when it gets too hot (ie- cause it was installed incorrectly,no breathing room above it, insulation stuffed too much around body of light) this may explain the off/on situation. you didnt state how they flashed on/off? quick flashing? off then 25 min later on again? very imporant!!!! ----call an electrician--- I dont care if it is a $900/hr guy or your brother-in-law. Get someone/anyone(qualified) to look at it. when the breaker at the main box kicks and wont stay on again its a sign that there is a problem. could be a bad switch,bad light fixture,bad breaker,or.......bad wire. How old is the wiring in the house? please dont screw around and blow this off. Im no big shot inspector or state code enforcement oficer but I am a son,grandson,brother,husband,& father. if the water leaks you can turn it off and dry off. if the paint drips you can clean it up later. there is no pause button on an electrical fire. call someone. didnt mean to rant so hard, but fire kills without malace. The flickering lights and then the tripping breaker mean that you probably have a short circuit someplace. Don't try to turn on the breaker again until you have an electrician fix the problem. Trying to turn on the breaker may cause a fire. The breaker is tripping because it is trying to protect your home from burning down. It's cheaper to get if fixed than to replace your home.


How would you change a fuse to a mini circuit breaker?

I imagine you are talking about an actual fuse box, as opposed to a breaker box. These are different. One has circular fuses, the other has breakers, which generally look like switches. If it is a fuse box, unscrew the circular fuse and replace it with a fuse of the same amperage. The amperage is noted somewhere on the top of the fuse facing you when you look at in the fuse box. It will either be 15A [A for Amps] or 20A if it is in a house. If it is a breaker, and it is just tripped, turn it all the way off, and switch it back on. If the breaker is actually bad, use should call an electrician.


What happened to the vaudeville performers to the new stars of radio?

Television and radio had amazed audiences so much that they lost interest and time for vaudeville. Entertainment right in your living room was practically revolutional. Imagine if everytime you wanted to turn on your tv today you had to get dressed up and leave your house?


Where are parallel circuits found?

parallel circuits can be used for lots of things.Things such as : . Christmas tree lights False for A+


What causes circuit breaker to trip even when it's properly rated?

A circuit breaker is dual function. The only time it will trip is if it senses a fault current that is rated higher than the breaker rating (short circuit). The other trip condition is if the circuit is overloaded and is drawing a current higher than the breaker rating. On breakers that protect motor feeders the breaker has to be rated 250% higher than the motors full load amperage. If the breaker has lots of use and is used for a switch being manually turned off and on will weaken the trip value of the breaker. If you have access to, or know an electrician, a clamp on amp meter on the conductor that the breaker feeds will tell you what is happening. Clamp the line and turn on the load to see exactly what the current is. If, like you say, the breaker is properly rated and the current is within the breaker limits then change out the breaker for a new one.

Related questions

Once a light bulb burns out anywhere in my house all the other light bulbs go out and wont turn back on?

Try to check your breaker.the breaker trip off.


Shop vac trips house breaker?

If the Shop Vac is tripping the breaker to a house turn other electronics off while it is in use. The power in the house should be checked out by a electrician.


Parking lights will not turn off is it a relay or circuit breaker?

It is a relay or switch problem. A circuit breaker or fuse won't keep a light on.


How do you reset Toyota air bag warning light?

Fix the problem. It retests everytime you turn the key on.


Turn on light house light in Poptropica?

Take the lobster claw and turn the switch.


How do you make your electric bill go up?

Turn every appliance and device on in the house. If the main breaker trips, turn a few devices off until the breaker does not trip. Prepare for a bill in the hundreds of dollars.


How do you turn furnace on without thermostat?

turn breaker off. unhook thermostat wire to furnace turn breaker on. worth a try; if it works you will have to turn off breaker to shut it down.


What to do if heat will not turn on in house?

If you have electric heat, check the fuse box to see if you blew a breaker. Also, try just turning on the fan: this will tell you if you are at least getting electric to the unit. Listen when you turn on the heat--is anything trying to turn on? If you are lucky, you can reset the breaker and are good to go. Find the manual and try its suggestions. Otherwise, call a repairman. For gas, check to see if the pilot light is still lit. If not, turn off the gas and light it. Turn the unit on. Check out the users manual for other suggestions. If it doesn't work, you probably need to call a repairman.


Why automatic transmission shift indicator light turn off?

bulb burned out; fuse/circuit breaker open


How do you change the lite in an in ground pool?

Turn of the breaker to the light. Drain the pool (at least below the light). Unseal the light. Remove and replace the bulb. Re-seal the light (replace the gasket if the mfr recommends this). Turn on the breaker and check the light for function. Fill the pool. Check the light for leaks. Piece of cake, actually. It just takes a while to do. Don't forget to check the pool chemistry after filling it!


When you turn on a light bulb in your house you convert?

Electricity to visible light and heat as a by product.


How do you replace a 15 amp breaker in the circuit box?

The breaker will have a black wire connected to it. Turn off the main breaker and then disconnect that black wire from the breaker. The breaker will snap into the main bar. Remove the breaker and install the new one. Reconnect the black wire to the breaker and then install the cover and turn the main breaker back on.