0
What else can I help you with?
What does forced commutation mean?
The term "Forced commutation" is used when a thyristor is turned off using external components. If a thyristor is used in a DC circuit, when first turned on, it will stay on until the current goes to zero. To turn off the thyristor it is possible to use a Forced commutation circuit. The circuit creates a reverse voltage over the thyristor (and a small reverse current) for a short time, but long enough to turn off the thyristor. A simple circuit consist of a precharged capacitor and a switch (e.g. another thyristor) parallel to the thyristor. When the switch is closed, the current is supplied by the capacitor for a short while. This cause a reversed voltage over the thyristor, and the thyristor is turned off.
Which voltage is greater in thyristor whether forward breakover or reverse breakdown voltage?
One voltage is greater in thyristor whether forward breakover or reverse breakdown voltage. The greater of the two voltages in thyristor is forward breakover voltage.
Which voltage is greater in thyristor whether forward break over or reverse breakdown voltage?
It is stated that one of the voltage is greater in thyristor whether it be forward breakover or reverse breakdown voltage. It is also stated that the greater of the 2 voltages in thyristor is the forward breakover voltage.
What is commutation of thyristor?
the process of turning off of a thyrisror is known as commutation
What is the use of thyristor?
Function of a thyristorA thyristor - also known as an SCR (silicon controlled rectifier) - is like a very fast static switch and is good for controlling large amounts of power (called power regulation) and for controlling the speed of dc motors. Another typical application is to make dimmers for lighting circuits.How it worksA thyristor is semiconductor device having 3 electrodes:an anodea cathodea gateNo current can travel from the anode to the cathode until a pulse which has the right amount of voltage (called the "trigger voltage") has been applied to the gate for the right minimum amount of time (called the "trigger duration") which causes the thyristor to switch on to allow current to flow through it from the source to the load.After being triggered, current continues to flow through the thyristor from the source to the load until either:the load gets disconnected from the thyristor by some other means orthe supply of current from the source to the thyristor gets turned off by some other means.
Why isn't a thyristor suitable as an interface device?
It can be. I have a heap of them in my irrigation system. You need to state what kind of interface you are asking about.
What are types of thyristor?
Types of thyristor firing art
What is conduction angle in thyristor?
not a clue a A: It all depends on the thyristor. There are no calculation involved not until you look up the thyristor specifications and decide on the load of the thyristor then you may calculate or more likely choose.
Is modern warfare suitable for an 10 terming 11?
yes because it isnt that violent
Is modern warfare 3 suitable for an 10 year old?
because it isnt that violent
Turn off and turn off mechanism of thyristor?
The turn off and turn off mechanism of a thyristor can be best explained by the gate turn-off thyristor. The thyristor uses the reverse bias mechanism.
How does a thyristor function?
A thyristor is a semiconductor device which acts as a switch.
What is the function of thyristor?
Thyristor is a kind fast acting switch. These are fully controlled switches
What does forced commutation mean?
The term "Forced commutation" is used when a thyristor is turned off using external components. If a thyristor is used in a DC circuit, when first turned on, it will stay on until the current goes to zero. To turn off the thyristor it is possible to use a Forced commutation circuit. The circuit creates a reverse voltage over the thyristor (and a small reverse current) for a short time, but long enough to turn off the thyristor. A simple circuit consist of a precharged capacitor and a switch (e.g. another thyristor) parallel to the thyristor. When the switch is closed, the current is supplied by the capacitor for a short while. This cause a reversed voltage over the thyristor, and the thyristor is turned off.
Can we replace a thyristor by a mosfet?
No because a mosfet does not work the same as a thyristor. In a thyristor the current flows even when the gate pulse is removed, until the current stops. That is not the case for a FET.
What are the two conditions necessary for a thyristor to begin to conduct?
There are more than two conditions that can make a thyristor conduct, but the general (functional) ones are: 1) positive voltage form anode to cathode, and 2) a positive voltage on the trigger input (referenced to the cathode) for a standard polarity thyristor. Other conditions can be: A) Anode-Cathode Voltage exceeding thyristor witholding voltage. B) Overtemperature of the thyristor chip C) Faulty thyristor (can be caused by overloads)
Which interface is most suitable for high-end audio and video devices?
IEEE 1394b FireWire
