no a 6 . 0 engine
everyone knew tht
The crank sensor should be on the drivers side of the transmission bell housing. It's more towards the top of the bell housing. The easiest way to get to it is reaching down from the top of the engine just below the valve cover. Atleast that is where it is on my 91 4.0L
Just in front of crossmember, passenger side and near the bottom.
on the 2002 model, open the hood, and on the left side of the engine, there should be a black box, above and to the left of the radiator cap, remove the black box cover with your hands, and you should be able to access the engine fuse box. I think there are three (3) different relays in there that operate your cooling fans.
It is screewed into the side of the engine, just in front of the starter. when you remove it coolant will come out of the engine. Just be fast about changing it and make sure engine is cold.
The engine might if they are both 4.0's. That would be about it.
Where is located the crankshaft sensor in Chevy avalanche 2002 engine 5.3?
It is located on the engine.
In the back of the engine.
Crankshaft Position Sensor (CKP Sensor)
where is the crankshaft position sensor located on a 2002 Volvo S60 2.4 engine
Front of engine, near crankshaft pulley on passenger side.
where is the crankshaft position sensor located on a 2002 Volvo S60 2.4 engine
The 2002 Silverado 4.8 liter engine knock sensor is located on the back of the crankshaft. The back engine cover will need to be removed in order to view the sensor.
Where is the crankshaft position sensor on a hyundai accent 2002
It should be above the starter on the engine block.
crankshaft position sensor sits in the lower part of the engine somehow on the top of chamber. when you open the chamber which is also called oil pain you will see the crankshaft position sensor.
it's on the engine block you have to take the alternator base and is under that