0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much is a rca victor radio model 6-bx-6 worth?
Generally if it is complete and has no cracks or damage about $20. Remember all radios like this need to be serviced, replacing filter capacitors. Otherwise you might burn somethin gout using the original parts.
What is the scale of c double sharp major?
The Cx Major scale will have 14 sharps (all 7 double-sharps), and the scale goes like this: Cx, Dx, Ex (same as F♯), Fx, Gx, Ax, Bx (same as C♯), Cx.
What chapter did natsume confess?
Chapter 90 is the chapter where Natsume said that Mikan was the 'girl he loved'. But the nice parts are actually chapter 84 & 86! In chapter 84, Natsume 'borrowed' Mikan as the 'person he love' . In chapter 86, Natsume was forced to say nasty things about Mikan and said that she was an 'eye sore'. After that he ran after Mikan (because Mikan ran away after hearing that) and hugged her. Chapter 84 & 86 are the sweetest! :) Chapter 90 is not bad too, get to see the Dangerous Ability Type class's expression.
Natsume wear a mask and hugged mikan?
The Mask Part: Natsume wore a mask to hide his face from Mikan (although I've forgotten why, hehe, sorry!), but that is the mask of a competitor in the race, so he had to go join the race. The rules of the race is to 'borrow' a person that best describes what is written on the paper you get, so Natsume got a "The person you loved" . He 'borrowed' Mikan and finished the race. The Hugging Part: Luna wants Natsume to say nasty things about Mikan, so Mikan would hate Natsume(he did that cus Luna threatened him). So Natsume said that Mikan was an 'eye sore' in front of many people and Mikan accidentally heard it. Mikan starts to run away, sad, and Natsume realised that Mikan heard him, so he chased after her. When he caught up to her, he wore the mask and hugged her. After that, he sprints away. haha, nice story. :) hope this helps! -bx
Why did Taylor swift break up with Joe Jonas?
i don't think Taylor broke up with joe, i think joe broke up with Taylor. he broke up with her cuz she wanted alot of attention and joe didnt really have time for her, but Taylor didnt understand that so they had no other choice but to go their separate ways. don't get me wrong i like Taylor but i think if she would of given joe his space, they would still be together.p.s. did you know that the song "forever and always" from Taylor swift is dedicated to joe Jonas!!!!!!!!THEY WERE SUCH AN AWESOME COUPLE!!Okay... I'm not actually 'improving' the answer. Just adding more details XP. Joe broke up with Taylor. Such a meanie. but whatever -_-".He broke up with her through the phone. Really what kind of jerk would do that!!!! ZZZ >.< bx
Can BX connectors be used with romex wire?
They can as they will support the wire into the box. The deciding factor should be the cost. A BX connector costs about four times the price of a romex connector. Also to keep in mind is that most junction boxes these days have their own built in clamps.
What is a BX connector?
A BX connector is a special type of box connector used for securing a BX cable to a junction box. BX is a type of armoured cable that is used for specific locations where ordinary Romex cable could become damaged. Before the connector is installed onto the BX cable there is a small PVC collar to be installed. In the trade it is called an anti short. It slides between the outer sheath of the BX and the conductors inside the sheath. It adds protection for the inner conductors from rubbing against the outer sheath if any vibration is involved in the installation. There is usually a small hole in the BX connector and the red anti short can be seen through this hole. This makes it easy for the electrical inspector to see if the anti short bushing has been installed during an inspection, and they do check.
Can the ground wire from two separate circuits (one 20-amp one 15 amp) be shared?
There wasn't room for more details: I know they're shared on the bus bar. I meant to ask if they can be connected in the junction box? I found a jct box with the two circuits. They are completely separate except for the grounding conductor/ground wire, which are connected. This is because the 15-amp has armored BX and junctions with 14-2 romex, so the ground for the romex connects with the ground for the 12-2/20-amp. Thanks.
What does bx stand for in bx cable?
Bronx
Write a program to subtract two 16 bit numbers in microprocessor 8086?
.code main proc mov ax,@data mov ds,ax lea dx,msg ;printing msg mov ah,09h int 21h mov ax,x ;ax=x mov bx,y ;bx=y cmp ax,0 ;jump to l3 if ax is negtive jb l3 cmp bx,0 ;jump to l6 if bx is negative jb l6 cmp ax,bx ;if ax<bx,then jump to l1 jl l1 sub ax,bx ;else normal sub mov diff,ax ;diff=result is stored jmp l2 l1: ;iff (+)ax<(+)bx neg bx ;bx=-bx clc add ax,bx neg ax ;-ans=ans mov diff,ax mov dx,2dh ;print '-' mov ah,02h int 21h jmp l2 l3: ;iff (-)ax neg ax ;-ax=ax cmp bx,0 ;jump to l4 if bx is negative jb l4 clc add ax,bx ;ax=(+)ax+(+)bx mov ax,diff mov dx,2dh ;print '-' mov ah,02h int 21h jmp l2 l4: ;if (-)ax & (-)bx neg bx ;-bx=bx cmp ax,bx ;if ax>bx then jump to l5 jg l5 sub ax,bx ;else ax-bx mov diff,ax mov dx,2dh ;print '-' mov ah,02h int 21h jmp l3 l5: ;if(-)ax>(-)bx xchg ax,bx ;exchange ax and bx sub ax,bx ;ax-bx mov diff,ax ;ans is positive jmp l2 l6: ;iff (-)bx neg bx ;-bx=bx add ax,bx ;ax-(-)bx mov diff,ax ;ans will be positive mov ah,4ch int 21h main endp
Program to subtract two 8 bit numbers using 8086 microprocessor?
I have a code for 16 bit subtraction.. just replace ax by al,bx by bl etc... .code main proc mov ax,@data mov ds,ax lea dx,msg ;printing msg mov ah,09h int 21h mov ax,x ;ax=x(any number) mov bx,y ;bx=y( " ") cmp ax,0 ;jump to l3 if ax is negtive jb l3 cmp bx,0 ;jump to l6 if bx is negative jb l6 cmp ax,bx ;if ax<bx,then jump to l1 jl l1 sub ax,bx ;else normal sub mov diff,ax ;diff=result is stored jmp l2 l1: ;iff (+)ax<(+)bx neg bx ;bx=-bx clc add ax,bx neg ax ;-ans=ans mov diff,ax mov dx,2dh ;print '-' mov ah,02h int 21h jmp l2 l3: ;iff (-)ax neg ax ;-ax=ax cmp bx,0 ;jump to l4 if bx is negative jb l4 clc add ax,bx ;ax=(+)ax+(+)bx mov ax,diff mov dx,2dh ;print '-' mov ah,02h int 21h jmp l2 l4: ;if (-)ax & (-)bx neg bx ;-bx=bx cmp ax,bx ;if ax>bx then jump to l5 jg l5 sub ax,bx ;else ax-bx mov diff,ax mov dx,2dh ;print '-' mov ah,02h int 21h jmp l3 l5: ;if(-)ax>(-)bx xchg ax,bx ;exchange ax and bx sub ax,bx ;ax-bx mov diff,ax ;ans is positive jmp l2 l6: ;iff (-)bx neg bx ;-bx=bx add ax,bx ;ax-(-)bx mov diff,ax ;ans will be positive mov ah,4ch int 21h main endp
When was Citroën BX created?
Citroën BX was created in 1982.
When was BX Warrior created?
BX Warrior was created in 2006.
When was Toyota BX created?
Toyota BX was created in 1951.
How do you change a cigarette lighter fuse on a ford escort zx2?
The fuse box is under the dash by your left foot. The diagram is on the panel and there are replacement fuses in the bx if you have never used them.
Where did BX get its name?
The term BX is a trademark owned by GE. The term "BX" is a short form for Bronx because GE had a facility to make the cable.
What does bx mean in electrical terminology?
it was manufactured in the Bronx,NY. the initials for Bronx are bx.
