0
You shouldn't do this. They have different types of strings for a reason. But if you're still insistent upon trying it, make sure you have a professional guitar tech do this for you, because chances are, even if you use the exact same gauged strings, you will have to have your truss rod readjusted, which will cost more than buying strings that are made for an Electric Guitar.
Wiki User
∙ 15y ago
Wiki User
∙ 14y agoBy normal I assume you mean a string made of Nylon. (looks like any other plastic)
There are two general types of string - Nylon and Steel (which are usually not made of actual steel) Electric Guitars usually use steel strings, and acoustic guitars use both nylon and steel. (although not at the same time - the metal-like strings on a nylon stringed guitar are wire wrapped nylon thread)
As for using 'normal' Nylon strings on an electric guitar, I would not advise it. The steel strings used on guitars have a much higher tension than that of a nylon string. Electric guitars and Acoustic guitars with steel strings have a steel bar in their neck to stop them bending under the tension of the steel strings. Putting a low tension Nylon string on an electric guitar would not damage the guitar at all, but it would probably snap the string after a short time of playing, if not immediatly. You could give it a try though.
Also, you would not hear any sound come through an amplifier unless you put a metal coating on the Nylon, as the pickups in an electric guitar only channel a sound signal when something magnetic passes over them.
Wiki User
∙ 15y agoMany artists use electric strings on Acoustic instruments as they have a slightly different tone. You can use any electric string on an Acoustic, but it's always preferred to have all strings on the instrument of the same type - in other words, either use all Acoustic or all Electric, don't mix.
Wiki User
∙ 12y agoYes. Guitar Strings generally range from extra light to heavy, but the sizes can vary depending on the company that's issuing them.
However, the strings that are designated for an acoustic guitar differ from the strings that are designated for an electric, as the strings on an acoustic are much thicker.
Cheers!
Add your answer:
Earn +20 pts
Can you use acoustic guitar strings for acoustic electric?
using acoustic strings on an electric does not damage the guitar. tightening them too tight does. acoustic strings tend to be thicker than electric strings, so all you have to do is just tune lower to avoid putting too much stress on the neck. i just want to know why they use different materials to make them. ============ Answer No the strings are completely different. It would be much harder to play an electric even if for some reason you did put them on. And you definitely don't want to mix the two! ================ I'd be inclined to think that stringing thicker, shorter acoustic strings on an electric guitar would actually damage the electric guitar. It wasn't built to withstand that kind of string tension. The reverse can be done -- using electric strings on an acoustic guitar -- but you won't get a great deal of tone or attack. Great for a very easy-playing acoustic guitar for songwriting and low-volume playing, though.
What are the easiest acoustic guitar strings to play and have the best sound For an Acousticelectric guitar?
the best string size for this is 8-38 but their very quiet and break easily. its best to just stick with light gauge 9-42 until your fingers develop strength. Think of it like weight training. My advice is to lower the action as its much easier if your strings are low to the fretboard and of course lower tunings aren't as brutal to your fingers.
What kind of strings are used on an Archtop Guitar?
It is down to personal preference as to which strings are best for an archtop guitar. Chromes and flatwound strings are both popular. Light gauge strings are preferable as they put less pressure on the neck.
Does electric guitar give you callus?
At first yes, when your fingers get sore just put the guitar down. It takes time to get used to it. I recommend thin strings like light gauge and a lower tuning if it hurts to play.
What guitar strings does John Mayer use?
I read that he uses D'Addario XL115 strings for his electrics and D'Addario EXP16 strings for his acoustics. <------------- WRONG!! John uses Ernie Ball Super Slinkys on his electrics and Ernie Ball Acoustic Coated Slinkys on his acoustics. I don't think that John has ever used D'Addario strings.
Can you use acoustic guitar strings for acoustic electric?
using acoustic strings on an electric does not damage the guitar. tightening them too tight does. acoustic strings tend to be thicker than electric strings, so all you have to do is just tune lower to avoid putting too much stress on the neck. i just want to know why they use different materials to make them. ============ Answer No the strings are completely different. It would be much harder to play an electric even if for some reason you did put them on. And you definitely don't want to mix the two! ================ I'd be inclined to think that stringing thicker, shorter acoustic strings on an electric guitar would actually damage the electric guitar. It wasn't built to withstand that kind of string tension. The reverse can be done -- using electric strings on an acoustic guitar -- but you won't get a great deal of tone or attack. Great for a very easy-playing acoustic guitar for songwriting and low-volume playing, though.
What is a good acoustic guitar stings that are light on the fingers?
Get nylon strings if you are a beginner. They have a soft, mellow tone and are easy on the fingers.
What are the easiest acoustic guitar strings to play and have the best sound For an Acousticelectric guitar?
the best string size for this is 8-38 but their very quiet and break easily. its best to just stick with light gauge 9-42 until your fingers develop strength. Think of it like weight training. My advice is to lower the action as its much easier if your strings are low to the fretboard and of course lower tunings aren't as brutal to your fingers.
If you are using light strings on your parlor acoustic guitar can you replace your G string with a B string?
Yes it is. It is not recommended to do this all the time though, as each gauge string exerts different stress and tension on the guitar neck. It's best to do this only until you can get yourself new strings.
What type of string would I put on a Starcaster 34 scale acoustic guitar light or medium?
if you are taking about the guage of strings it depends on what you prefer. if you want them to bend easily go light. pick medium if you want them to be heavier.
What kind of strings are used on an Archtop Guitar?
It is down to personal preference as to which strings are best for an archtop guitar. Chromes and flatwound strings are both popular. Light gauge strings are preferable as they put less pressure on the neck.
Does electric guitar give you callus?
At first yes, when your fingers get sore just put the guitar down. It takes time to get used to it. I recommend thin strings like light gauge and a lower tuning if it hurts to play.
What guitar strings does John Mayer use?
I read that he uses D'Addario XL115 strings for his electrics and D'Addario EXP16 strings for his acoustics. <------------- WRONG!! John uses Ernie Ball Super Slinkys on his electrics and Ernie Ball Acoustic Coated Slinkys on his acoustics. I don't think that John has ever used D'Addario strings.
What size is the g string on an acoustic guitar?
hmm... well without looking at the guitar a 15 to 19 will do the trick, match the rest of the gauge, it may be a 12-52 so a 19 roughly depending on brand... or if its regular light strings its a 17, as long as its over a 15.
What guitar does Mark Tremonti use?
D'Addario EJ20 Nickel Wound Jazz Extra Light Electric Guitar Stings he uses nine through 42's.
What can you do on a guitar to make a louder sound?
There are many ways to improve the sound of your playing, but if you actually want to improve the sound of the guitar itself you must first assess what improvement you're after. To maximize the inherent tonality of any guitar you can at least start by making sure the action isn't too high/low and particularly that the nut is cut low enough. It's a common problem that makers don't spend the time to fine tune the nut and generally leave them high, which can make a very noticeable improvement in general tonality. Then there's strings - make sure you're using ones that will give a tonality you're after. Light strings may be easier to play on, but can sound thin and weak. My personal preference is lighter strings on top, heavier on bottom, which gives much more support to your tone. Very important if you're playing by yourself.
Club penguin where is the electric guitar 2010?
in the music catalog 2010 at the light house
