maybe
i dont know oem is original equipment manufacturer that means a factory installed radio
Yeah, why not?
It may or may not, block heaters are not factory installed unless special ordered.
When you turn the key off and lock the doors, there will be a red light on the top of the dash that flashes while the alarm arms.
I imagine a 2002 would have similar wiring to a 2000 Explorer which I've just discovered myself has 2 fuses dedicated to the factory installed trailer wiring. Fuse #3 is for the left trailer signals and fuse #7 is for the right. Hope this helps someone to avoid all the hassle I went through to figure this out.
If the transmission is the original in the vehicle, then the factory id tag will have codes to tell which transmission was installed. Depending on the year and type of the transmission, there will be a tag or stamp on the transmission to indicate the model.
factory installed turbo 350
Already has one installed from the factory. Fancy aren't they?
There where no factory installed grease zerks.There where no factory installed grease zerks.
Is this in the automatic transmission fluid pan . What I have read from another contributor is that it is the plug put in the transmission by the factory that is pushed in when the dip stick tube is installed .
if you have 4x4 you can pull 1500 pounds but even if you do have 4x4 i suggest getting a transmission cooling system from uhaul if you have an automatic transmission because even though it says its okay to tow, if your tracker did NOT come with a tow package from the factory (which none of them did) then you need the transmission cooling system or you will fry your transmission and damage your transfer case.
no there is not a factory tow package for the tracker, any tow package that you put on your tracker you will also have to install a transmission cooling system so you do not fry your transmission and damage your transfer case, you can get one at your local uhaul company.
Chrysler didn't have factory installed remote starts in 1998. Factory installed remote starts came in the 2007 years. It was likely installed at a dealer when the car was bought.
It can be factory installed as an option.
I'm not a mechanic / technician but another contributor had mentioned that there was a piece that plugged the transmission dipstick hole at the factory that was pushed into the transmission pan when the dipstick tube was installed . It indicated that it was the first time the transmission pan had been off
That plunger looking thing is a factory plug that was originally installed in the hole where the dip stick tube mounts in the transmission. This plug is pushed into the hole as the dip stick is being installed. It sits in the bottom of the transmission until the first oil change, at which time you throw it out.
Factory lift kit installed VIE factory were truck is manufactured