Want this question answered?
If you need to ask the question, then the answer is "You take it to someone who knows something about electronics and pay them to fix it." There are so many potential things that could be wrong with an amplifier that we can't possibly give you an exhaustive list of "how to fix" it.
Have you tried changing the settings on your amp? there could be too much gain. If you have tried this, there may be a hole or other form of damage in the speaker. take a look if you can. They can sometimes be fixed, but if not you could be looking at buying a new amp.
Open up your amp and see if there is loose wiring on your on/off switch. If so, you can take a soldering iron and fix it. If that doesn't work, or that's not the problem, then you can take it in to a guitar shop for a replacement switch, which will only cost you around $10.
a ground lift adapter should help. theyre sold at Radio Shack, Menards, Lowes, and other places where electrical items are sold.
It doesn't have static "in" it, its just sounds that way when you try to plug it in. If you are getting allot of "noise" then your guitar isn't shielded properly or it isn't grounded properly. The amp may not be earthed or grounded properly. You may need to get the guitar and amp checked at a Guitar store. The lead may be damaged, for example if you can unscrew the end of the lead, the plug, you can see if the solder has broken , then you can get someone to solder, fix it, or if it is a sealed lead, buy a new one.
put fuseable lin on the power wire that goes to the amp
No matter what cord I use, no sound will come through the amp. How can I fix this?
yes
Yes they can be repaired. It's just the fact if it's a cheap amp it will cost more to repair than to buy new one. If it's a $500 amp then get it repaired If it's $200 amp trash it.
you collect spare parts, then work in it by pressing +right and selecting it.
i dont see why you'd have to fix a new amp, but id advise just buying a new one. unless you have a lot of experience it would be incredibly difficult to fix it.
Sounds like you have a short. Unless you are electronically inclined, take it to a reputible mechanic. It should be a rather quick fix.
If you need to ask the question, then the answer is "You take it to someone who knows something about electronics and pay them to fix it." There are so many potential things that could be wrong with an amplifier that we can't possibly give you an exhaustive list of "how to fix" it.
Make sure that you replace the fuse with one that is recommended for it. Make sure that it is the righ amp.
It's probably the amp, either change it or replace the audio system
Have you tried changing the settings on your amp? there could be too much gain. If you have tried this, there may be a hole or other form of damage in the speaker. take a look if you can. They can sometimes be fixed, but if not you could be looking at buying a new amp.
their is a 10 amp fuse on the back of the radio you need to pull the radio out to change it