Here are instructions from the Philips website. Please see related links at the bottom of the answer To Groom Sideburns and Moustache: Switch the razor off. Clean the razor and razor head assembly by running under hot water before installing Trimmer. Press the Razor Head Release Button located on front side of razor, directly under the shaving heads to remove head assembly from razor. Remove razor head assembly from razor. Tilt the Trimmer Slightly backwards. Fit the Trimmer onto the razor (you will hear a click).The Trimmer is now ready for use. Activate the Trimmer by pressing the on/off button once.
Cut it. Then attach new end (either male or female, as desired) in accordance with manufacturer's instructions. Ensure you use correct size and style replacement end.
There is a strap which you wrap around your wrist and a wire with a clip on the end. Attach the clip to the chassis of the computer to eliminate static electric discharge. Any difference in voltage between the chassis and you will flow through the wire and be neutralized.
You don't
That is how you attach an arrow to the bow.
fghjk
To replace the trimmer head on your Ryobi Expand-It trimmer, first, remove the old trimmer head by unscrewing it. Then, attach the new trimmer head by screwing it on securely. Make sure to follow the manufacturer's instructions for proper installation.
http://www.howtomendit.com/questions.php?id=62&page=1
I take my old trimmer and open it. Then I remove its upper portion and attach a long strip of cardboard on the upper side of its motor and switch on the trimmer. My rechargeable battery fan was prepared.
You can attach a microphone to it and amplify the sound.
To attach an ebike trailer adapter to your electric bike for increased cargo space, follow these steps: Purchase a compatible ebike trailer adapter that fits your electric bike model. Locate the attachment points on your electric bike where the adapter can be securely mounted. Use the provided hardware or tools to attach the adapter to your electric bike frame. Ensure that the adapter is securely fastened and test it with a light load before using it with heavier cargo. Follow any additional instructions provided by the manufacturer for proper installation and usage.
To answer this question the electrical data is needed from the motor name plate.
Yes there is. It looks similar to an 'ordinary' violin - except that it includes an electronic pick-up (like you find on electric guitars). The pick-up includes a socket to attach a lead - which is fed to an amplifier.
The power lines are the responsibility of the city or county you live in and are not things that a contractor will accept jobs to work on. If your lines are obstructed, call the county electric officials and they will come out and help, it's their responsibility.
To put on an electric guitar strap, attach one end to the strap button at the bottom of the guitar and the other end to the strap button at the top of the guitar. Adjust the length of the strap to a comfortable position for playing.
Did you attach the electric contacts to your starter? Do you have a good battery? Someone needs to check out your electrical system.
The present tense of "attach" is "attach."
The best place to find out about this would be to check out your local Radio Shack to help you find out exactly what you need. They might be able to provide you with some adapters and what not.