http://www.howtomendit.com/questions.php?id=62&page=1
On the throttle body, opposite of where the cable attach,On the throttle body, opposite of where the cable attach,
On the throttle body, opposite of where the cable attachOn the throttle body, opposite of where the cable attach
On the throttle body, opposite of where the cable attach.
To hook up the throttle cable on a 1972 AMF golf cart, first ensure the cart is off and safely positioned. Locate the throttle linkage on the engine and identify the throttle cable attachment point. Attach one end of the throttle cable to the throttle pedal assembly and the other end to the throttle linkage, ensuring it is secured and adjusted for proper tension. Finally, test the throttle pedal to confirm smooth operation and make any necessary adjustments.
To install a throttle cable on a 1977 Datsun pickup, first, remove the old cable by detaching it from the throttle linkage and the pedal assembly. Next, route the new throttle cable through the firewall and attach it to the throttle linkage on the engine, ensuring it is properly aligned. Finally, connect the other end to the accelerator pedal, adjusting the cable tension as needed for smooth operation. Test the throttle to ensure it opens and closes properly before securing everything in place.
On my 1994 Mazda Navajo, which should be the same as an Explorer, their is a black plastic cover with 3 bolts on top of the engine. When you remove the cover the throttle and cruise control cables attach to the throttle lever there. My throttle is sticking but the problem seems to be where the cable attaches to the pedal.
It will have to be somehow attached to the throttle valve. Clamp the cable so that it doesnt moves then attach it to the vavle and it should go back and forth. The more the valve is openend then the more rpms it should have. Good luck.
Replace Angus cable craftsman 3.8 snowblower
The throttle cable is located on top of the throttle body.
A push-pull throttle is a very misunderstood thing. It is a dual cable throttle operation where in the pull cable is what opens the throttle plates. And, the push cable along with a throttle return spring is what closes the throttle plates.
the clutch cable attaches to the small pulley on left front of tractor mowing deck . there is a flat washer first than the cable than a locking pin to hold it hope this helps
The throttle cable is not adjustable.