answersLogoWhite

0

An alignment machine would be the best way.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you change the front axle on my dodge Dakota 2000 4x4?

howdo you change the front axel of a dodge Dakota 2000 4x4


What size socket fits front axel nut on 1994 dodge 1500 4x4?

1 11/16 in


Can you covert a dodge d100 into 4x4?

Yes. You need a transmission and new front axel. I would just find one with 4x4.


What size socket fits the front axel nut on a 1996 dodge 1500 4x4 truck?

1 11/16 inch


What can cause strong shaking of my 98 acura at 60 mph or above?

I would get the tires balanced first. If still having problems then check front axel shafts. I would get the tires balanced first. If still having problems then check front axel shafts.


Does your 89 Chevy silverado have a actuator on the transfer case?

NO it don't. The actuator is up on the front axel housing. Now the transfur case does have a switch on it that sends power to the actuator up front.


What do you need to repair a 1999 dodge 1500 that broke the front axel?

The drive axels can be removed & replaced individually. If you've actually broken the front differential housing you will need to get the gear ratio and find out what kind of diff you have in the truck and make a trip to the wrecking yard and get a used one and replace the diff. as a complete unit.


You changed your axel on your 1996 Jeep Grand Cherokee and you still hear a clicking sound?

Check the front driveshaft.


How to Replace 1985 Hyundai elantra front axel?

How do you replace a 1985 Hyundai Elantra Front Axel


How does the front axle go into the differential on a 1991 Chevy 1500 4x4?

Need to know what side you are working on. The driver side just snaps in. It has a lock ring on the end of the axel shaft. If you took the passanger side axel out of the housing, Then a big flat shim has fallen out on you and down in the housing. You will have to take the axel housing tube loose from the center Differential. Theres 4-5 bolts beside the 4x4 Actuator That needs removed to take apart. That will let the housing that the axel goes in come off, I forgot theres 2 bolts that hold the housing to the frame, Remove those too. Then find washer and put heavy grease on it and put it back in place, It goes over the end of the axel shaft. Good luck


Is it exspensive to fix the shift solenoid on the front axel of a dodge ram 1500 4x4 how difficult is it to fix?

it is not expensive and if you have a workshop manuel, it is an easy job


Can you get the oil pan off a 97 Chevy 4wd?

Yes, But the engine will have to be raised up and the front Axel housing MUST be removed to allow the oil pan to come out.