0
this is a very specialist job and should really only be done by a professional organ builder if you want the pipes to speak correctly again I suspect that the problem you are experiencing is with the reed pipes where the block has sugar of lead on it and become attached to the boot thus allowing small particles to drop onto the reed tongue. I have undertaken this kind of work and used a small metal file but beware that it is time consuming and the boots will have to be refitted due to the expansion caused by the sugar of lead personally i was not tempted to try any chemicals in fear of dissolving a surface of the lead block and causing another reaction or worse still making the shallot a bad fit. hope this has been of benefit some other organ builders will I am sure have found another method that has been satisfactory to them.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What are the Pipes of a pipe organ called?
Quite a wide variety of materials are used in organ building. Specifically the pipes are either metal or wood. The metal pipes smaller than approx. 4' are made of alloys of lead and tin. Larger metal pipes are made of zinc as it is stiffer and resists the tendency of large pipes to collapse under their own weight. Copper has been used occasionally for special and decorative purposes. Some builders have experimented with aluminum for large pipes but this is quite rare as is brass for some special purpose reed pipe resonators. Wood is sometimes used instead of zinc for larger pipes but wood is also used for entire ranks with the exception of the very smallest pipes. Aside from the pipework, the bulk of the material is wood. This includes not only solid wood but plywood and composite wood such as medium density fiberboard in modern organs. Leather is used for pneumatic pouches, bellows parts and gaskets. Ivory was once used for keys but synthetics , bone and hardwoods are now substituted. Plastics and plastic composites, steel, bronze, aluminum, cotton, felt, silicon (and the other substances used for solid state electronics), and many other materials are used in the many and diverse parts required for a modern pipe organ.
Is the trombone considered to be a brass instrument?
No. It is either considered a wind, electronic or hybrid instrument. One common misconception is that the pipes are made of brass due to the fast that facade pipes are often painted gold. Organ pipes are made of a lead - tin alloy, pure tin, pure lead (with trace hardeners such as antimony), wood or combinations thereof. Occasionally copper is used and on even rarer occasions brass is used for specialty pipes. Aluminum has also been experimented with.
Who sang the song Rosanna originally?
Bobby Kimball and Steve Lukather shared the lead in Rosanna. Kimball sang the Africa chorus lead while David Paich sang the verse lead. Kimball has the high, strong pipes that most associate with Toto.
Who is the lead singer for the band Needtobreath?
The lead signer of Needtobreathe (spelling correction) is Bear Reinhart. He does the lead vocals, is a guitarist and also plays the piano for the band. He also performs on an organ and a harmonica in some songs. The band primarily plays alternative and christian rock.
What is the name of the lead singer of crown the empire?
Andrew Velasquez is the clean vocalists and screamer is Dave Escamilla
Why were organ pipes made of tin?
Metal organ pipes are made of various proportions of lead and tin. These metals are used because they are easily manipulated both in the manufacturing process and during the voicing process where minute changes are made to the sound producing portions of the pipes. The proportion of metals depends on the sound the organ builder is trying to achieve. Tin is lighter and stiffer than lead. Therefore it will result in a more harmonically rich tone. Pipes that produce intense tones with fewer harmonics are often made of almost pure lead. Larger pipes will collapse under their own weight if made of a lead / tin alloy. Pure tin was used for larger pipes in European organs because of the availability of readily available tin deposits, particularly in England. It will also take a high polish giving the gleaming silver pipes that are typical of European organ facades. Zinc is commonly used for large pipes as it is less expensive than tin and more plentiful in North America and other areas.
Why the water pipes should not be suppliesd through lead pipes?
The lead will leach into the water and give you lead poisoning.
What element replaced lead for use in water pipes?
Iron replaced lead in water pipes.
A plumber has put 18 gallons of antifreeze into my water pipes can the antifreeze interact with copper or lead pipes or pipes with lead soddering and cause contamination to the water?
I can't think you are talking drinking water pipes because anitfreeze is poisonous. Nor should you have lead pipes or lead solder in drinking water pipes. So either sleeve pipes or heating pipes then. Antifreeze has inhibitors designed to prevent corrosion.
Where do the pipes lead?
to your toilet
Plumbers in rome used it for pipes?
They used Lead
When were lead pipes banned in the UK?
Lead pipes were banned in 1969 because lead is poisonous, especially for the vulnerable (children, pregnant women and the elderly). But, many pre-1970s homes will still have lead pipes today and they have been used in the UK for drinking water for almost 2000 years. The lead content in water is significantly reduced by calcium deposits etc on the inside of pipes but many home owners prefer to replace lead with copper pipes when renovating.
What problems are associated with lead pipes?
Lead poisoning. Answer courtesy of a slothbrain
Is lead in drinking water?
It can be... especially if it travels through lead pipes.
What is the orgin of the word plumber?
The name comes from the Latin word for pipes (appropriate, since a plumber works with pipes). Early pipes were made from the metal Lead- and the Latin word for lead is Plumbum.
Are lead gas pipes dangerous?
Yes
What element is used for pipes in rome?
lead
