make a tie and put Duct Tape on the tie. I have no idea what the previous answerer was talking about with duct tape. The correct procedure involves slipping the string through the hole in the bridge, then looping it back around the string and tying it, so that you're effectively tying the string to the bridge. It's not that hard, but I still prefer to just buy ball-end nylon strings and avoid it entirely.
string
It is the second thinnest string open.
Gretsch electric. Twelve string acoustic Guild. Six string acoustic Gibson.
The term acoustic, albeit not neccessarily accurate, usually implies a guitar with steel strings, whereas classical implies the use of nylon strings. For playing almost all types of modern music, a guitar with steel strings is preferred.
Very little. Rogue is the house guitar brand of Musician's Friend and its products are of quite poor quality. A second-hand 12-string acoustic might fetch $50 or so if it's in good shape.
It is obviously a string instrument.
string
It is the second thinnest string open.
Gretsch electric. Twelve string acoustic Guild. Six string acoustic Gibson.
The term acoustic, albeit not neccessarily accurate, usually implies a guitar with steel strings, whereas classical implies the use of nylon strings. For playing almost all types of modern music, a guitar with steel strings is preferred.
To put a guitar string on an acoustic guitar, first remove the old string by unwinding it from the tuning peg. Then, insert the ball end of the new string into the bridge and thread it through the corresponding tuning peg. Wind the string around the peg, tune it to the desired pitch, and trim any excess string.
they are both eqaully challenging
five string
Very little. Rogue is the house guitar brand of Musician's Friend and its products are of quite poor quality. A second-hand 12-string acoustic might fetch $50 or so if it's in good shape.
The standard acoustic guitar string gauge used for most guitars is typically light or medium gauge strings.
it would be a 5 string bass , but you can put piccolo strings on it to make it play like a normal acoustic.
To restring an acoustic guitar you have to drop the end if the string in the bridge and replace the pin. Then string it through the tuning post, kink it, and tune it.