answersLogoWhite

0

First you have to remove the light cluster that has the marker lights and such. I just went through this so I had to find it all the hard way. The local Ford dealer was no help at all. To remove the cluster there are two mounting bolts that go through the metal subframe. Theay are about 8 inches apart and really hard to see. But, take the nut off of the both of those and the light cluster comes right out. Then, you should be able to see the headlight assy and see how to remove it.

User Avatar

Wiki User

19y ago

What else can I help you with?

Continue Learning about Music & Radio

How do you replace the turn signal lever on grand Cherokee?

This link should help. http://www.jeepforum.com/forum/f140/how-2005-2009-grand-cherokee-wk-fog-light-install-867728/


You have 2004 Jeep Grand Cherokee Laredo brake and abs light is on how can you fix it?

How to change the brake switch on a 2004 Jeep grand Cherokee Laredo


How do i replace 1992 Jeep Cherokee Sport brake light bulb?

When replacing the rear light bulbs open the rear hatch look at the tail light assembly, you will see small bolts securing the assembly to frame. Also look between the bumper & light assembly, you will see a lower bolt attaching to frame. remove bolts, gently tug assembly upward & outward. look at the back you will see the sockets that the bulbs go in. To remove twist the socket to remove from assembly-replace with correct type bulb-have someone apply brakes or turn on the light to verify you have fixed problem-once corrected reassembly in reverse order. Good Luck Steve


What do the Jeep 2005 grand Cherokee check engine light symbols look like?

The check engine light on a 2005 Jeep Grand Cherokee looks like this... Here is a link Check Engine Light It looks like a little yellow engine.


How do you replace the bulbs in the center console on a Jeep Cherokee Laredo?

I do not beleive your jeep uses bulbs in the console. I have a 2000 grand cherokee and it uses a light strip that is part of the console and can only be replaced with the shifter assembly....... I plan to cut the wires from the light strip and install a pep boys console light that uses replacable bulbs....probably will just lay it in there as long as it is protected and safe... Good luck

Related Questions

How do you remove the lens to a headlight on a 2000 Grand Jeep Cherokee?

Not possible. You have to remove the whole light assembly.


How do you remove back light assembly on 2004 Jeep Grand Cherokee?

If you open tailgate there should be 2 black screws against rear fender - remove these and assembly should pull-out


How do you change a front directional light bulb on a 2004 jeep grand Cherokee?

You have to remove the whole headlamp assembly. Remove the 1 bolt 6mm? and pull outwards.


How do you replace the passenger side head light for a 2002 jeep grand Cherokee?

Remove bolt on top of headlamp assembly. Gently pry and pull assembly straight out. Bulb can now be acessed.


How do you replace a cooling fan relay switch on a 2002 jeep grand Cherokee?

You either remove the front bumper assembly or you remove the passenger side head light and cut a access hole.


How do i change the front side light on a jeep grand Cherokee 2003?

To change the front side light on a 2003 Jeep Grand Cherokee, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then carefully pull it out. Disconnect the electrical connector from the bulb, twist the old bulb counterclockwise to remove it, and replace it with a new one. Reconnect the electrical connector, reassemble the headlight assembly, and ensure everything is secure before closing the hood.


How do you change a right front turn light assembly on a 1994 Jeep Grand Cherokee lorado?

HI, I have a How To video that will show you how to remove the parking light assembly on your 93-98 Jeep Grand Cherokee. We show the driver side, but the passenger side is removed the same way. I'll include the link located below in the related links section. Hope this helps you out. 1ATony


Where is the fan relay switch on a 2003 Jeep Grand Cherokee?

Below the passenger side head light assembly.


How do you replace the brake light on a 2001 Jeep Cherokee?

To replace the brake light bulb you need to remove the whole light assembly. Once removed the change is simple.


Where is the fan relay in a 1998 Jeep Grand Cherokee?

Under passenger head light,must remove, relay is visible


How to Remove headlight lens from the headlight on jeep grand Cherokee?

The head light is a sealed unit. The outer sense is not removable.


How do you fix a rear head light going out for my Jeep Grand Cherokee 1999?

To fix a rear headlight that’s out on your 1999 Jeep Grand Cherokee, first, check the bulb by removing the rear light assembly. If the bulb is burnt out, replace it with a new one of the same type. Ensure the connections are clean and secure before reassembling the light assembly. If the bulb is fine, inspect the fuse and wiring for any damage or corrosion.