How do you remove the radio of a 2011 Mitsubishi outlander?

Answer 1

they way you take the radio out is under the radio in the cubby below it that is where the pannel end and you need to try to pulll it toward you PULL IT SLOW BEACUSE IT IS CLIPPED TOGETHER AGIN BELOW THE RADIO THE PANEEL END RIGHT HER THE CUBBY STARTS PULL THE BOTTEOM PANNEL OUT TOWARDS YOU IF YOU NEED PICS email ME AT OSCARFFJR@GMAIL.COM

Answer 2

The radio panel will just pop off if you firmly pry from the bottom just above the Air conditioning controls. Then grasp the sides and firmly pull towards you.

The panel is attached on the left side by one grey connector, so disconnect that. There are then just 4 screws holding the radio in, so take them out and gently pull the radio unit forward. There are now 2 white DIN connections and an antenna connection to remove and that is it. It shouldn't take any more than 10 minutes

Answer 3

You don't. Buick never made a Mitsubishi Rodeo. The Isuzu Rodeo is made mostly of Chevy parts, however and the radio can be removed using a crowbar, a hubcap, and a guy named Jesus.

Answer 4

'07-'08 model:

http://www.installer.com/pdf/99-7013.pdf There are also instructions on this site for a '04 if you search for it.

Answer 5

pop out the heat vents above the console and pull out the ashtray two screws on top of console. two above ashtray