0
first, there should be two L shaped angle brackets under the plastic cover over where the headlights are. take out the plugs holding that cover on and youll see the brackets. pull up on the brackets and the whole headlight assembly should come out forwards. take out the lights and wires and put them into the new assembly, then put the new one in the push the brackets back down. hope it helps
What else can I help you with?
Where can you find a radio wiring harness diagram for 2002 Pontiac Montana?
call the dealer
My 2005 Pontiac Montana has a light out behind the radio face. Can I replace this?
Answerpleas go to www.corvetteradios.com and look up what type of GM radio you have, and they will tell you what bulb you need and how to replace it. Second opinion: I have a 2000 P M with same problem & the Chevy dealer told me it could not be replaced. He said they replace the radio.Ye! Sux I know!
On a 1995 Pontiac Bonneville dash lights do not come on if headlights are off radio display lights up if headlights are turned on radio display turns off and dash does not light up?
The instrument cluster lights have their own fuse. It's a 5 amp at the bottom center of the fuse block. When the lights are on, the radio draws lamp power from the instrument cluster. This allows you to dim the brightness of the radio display with the other internal lamps.
1997 grand prix radio lights not working is this a bad fuse or do I have to replace radio?
if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
If the radio is not working in a 2007 Pontiac g6 sdn what is the problem?
if the radio is not working in a 2007 Pontiac g6 sdn what is the problem
Where is radio fuse located in 2001 Pontiac Montana?
No
Where do you find the XM radio code on a 2004 Pontiac Montana?
If a vehicle, like the 2004 Pontiac Montana has an XM Radio built in, the code to program the radio is found on Channel Zero. Tune the radio to XM then turn the tuner to Channel Zero.
How do you replace radio lights on a 1998 Monte Carlo?
Cant you have to replace the entire radio
04 Pontiac Montana where is factory amp located?
The Pontiac Montana does not come with a factory installed amp in the sound system. The wiring goes directly from the radio to the speakers.
Where can you find a radio wiring harness diagram for 2002 Pontiac Montana?
call the dealer
2000 Pontiac Montana Keyless entry fobs not working replaced batteries still not if receiver where is it located and can i replace?
took me a week to find the problem . under the hood take out the radio fuse and replace it ( even if it looks good )
How do you unlock the radio on a Pontiac Montana after the battery cable has been replaced?
with the motor running and radio off press buttons 1 and 4 on the radio this should unlock the radio
My 2005 Pontiac Montana has a light out behind the radio face. Can I replace this?
Answerpleas go to www.corvetteradios.com and look up what type of GM radio you have, and they will tell you what bulb you need and how to replace it. Second opinion: I have a 2000 P M with same problem & the Chevy dealer told me it could not be replaced. He said they replace the radio.Ye! Sux I know!
How do you replace the lights inside the Mercedes Benz E320 radio?
THE LIGHTS ON THE RADIO ON THE LEFT SIDE ARE NOT LUMINATED. WHAT DO I NEED TO DO TO FIX THIS PROBLEM?
How do you make the radio of 1999 Pontiac Montana work after it is disabled by the battery?
you will have to pull your radio out of the dash to be able to look at the model number and/or serial number of your radio. Call a local Pontiac dealer and they can give you a code to enter when you turn your radio on after changing your battery.
How do you replace bulb light on radio 2005 pontaic bonnievillie gxp and clock?
how do you replace light out radio and clock on 2005 bonnievillie pontiac gxp
How do you repair the radio display panel on a 2003 Pontiac Montana?
To repair the radio display panel on a 2003 Pontiac Montana, first, disconnect the vehicle's battery to ensure safety. Remove the radio unit from the dashboard by unscrewing the mounting screws and gently pulling it out. Inspect the connections for any loose wires or damaged components, and replace any faulty parts if necessary. If the display panel itself is malfunctioning, consider replacing it with a new or refurbished unit. Reassemble the radio and reconnect the battery to test the functionality.
