Small leak in the evap system. You need to do a smoke test
By taking the cable off battery putting back on reset code
If you want to reset your code for your safe, you must first remember the original code. If you cannot remember the original code, you will need to contact customer service for assistance.
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
To reset the code on a 2007 Honda CR-V, first, ensure the ignition is turned off. Then, disconnect the negative battery terminal for about 10-15 minutes to reset the vehicle's electronic systems. Reconnect the battery, and the code should be cleared. If you need to reset the radio code specifically, you may require the original code provided by the manufacturer or a dealership.
This is a dealer item. They can reset it.
Probably a bad gas cap.
It's a E V A P Emission Control System Leak (small)
evap leak small check gas cap may not be tight
facebook reset code
PO442 is a Service Engine Error code can be caused by one of the following: 1. Defective or loose fuel cap 2. EVAP canister or hose cracked- not connected 3. Purge or vent solenoid defective 4. Vaccum leak at engine
Code PO442 on a 2004 Grand Am indicates a small leak in the evaporative emission control system (EVAP). To address this, first, inspect the gas cap for proper sealing and any cracks or damage; replacing it may resolve the issue. Next, check the EVAP hoses and connections for leaks or blockages. If the problem persists, consider using a smoke test to identify leaks in the EVAP system.
how to reset the code of polo team luggage
how to reset nokia 1260 i forgot previous code
reset code
I reset the code after a dead battery and it was the wrong code, how can I reset it and /or find the corrrect code
How to reset security code in 2001 Z3
I have tried the code of 000000, but its not use can you have any other master reset code to be given for me