You need to take the top plate off. There's two small Phillips head screws on the back of the radio. Remove the top screw and the top plate lifts off. There is one toggle switch that says "Lock Off On". Toggle the switch to Off to unlock the time of day. There is a small button next to it that says "Time Set". Press it once and the time of day will start blinking. Press the "Alarm Time" buttons on the front of the radio forwards or backwards to set the correct time of day. Once the time is correct, move the toggle switch back to On to lock the time in and replace the top cover. I had to pull off the "Jazz" and "Pop" button tops to clearly see the time of day toggle switch and time set buttons. They just sit on top of the actual buttons so replace them prior to replacing the top cover. I'm in a Hilton at the Ft. Lauderdale airport and the top screw was missing. Looks like the maintenance guys have to come by pretty often to correct the time and lost the screw the last time they did it.
It is fairly easy to set an alarm on a GE cd clock radio 7-4801A. Hold down the alarm button. While doing this, you will want to change the time shown. this will be the time the alarm goes off. Finally, turn the alarm on.
Levi Hutchins of Concord, New Hampshire, invented an alarm clock in 1787. His alarm clock, however, rang at only one time-4 a.m. He invented this device so that he would never sleep past his usual waking time. He never patented or manufactured it. The first modern alarm clock was made by Antoine Redier (1817-1892) in 1847. It was a mechanical device; the electric alarm clock was not invented until around 1890. The earliest mechanical clock was made in 725 c.e. in China by Yi Xing and Liang Lingzan.
No.A "radio alarm clock" is a radio ... which you can use to lull yourself to sleep ... that has abuilt-in alarm, which you can set to wake you in the morning, either by turning the radioback on, or by blasting you awake with an annoying buzz that will ruin your whole day.A so-called "radio controlled" alarm clock ... sometimes advertised as an "atomic" clock ... isa clock that actually has a radio receiver built into it, which receives the NIST standard timesignals from Fort Collins, Colorado, and automatically keeps itself set to precisely exactlythe correct time.
Hold down the wake button while u set the time on the hour and min buttons. Then slide to alarm !!
Located on your Bose Remote control, there is a + and a - symbol under the area where is says "TIME". Make sure your system is ON. Press the + or - buttons to move the numbers on you system to set the desired time. After the desired time is achieved, press and hold the "ALARM TIME" button located at the bottom right hand corner of the remote to lock in the time.
An alarm clock knows exactly what time to start, by remembering what time you had said to start ringing, and the average alarm clock stops after 1 minute (60 seconds.).
An internet alarm clock works the same as a normal alarm clock just it is based on the internet. You enter the time you wish the alarm to go off and as long as your computer is turned on and connected at the time then it will sound the alarm.
Its easy all you have 2 go clock and then you click on time you set your alarm clock and press delete all the the time you set your alarm clock and then you delete it and all of your alarm clock set timer will be deleted and then the time on your phone will go back 2 the way it was
Digital Zen Alarm Clock will let you do that.
3:32
To tell time..
an alarm from your alarm clock, iPod, phone etc.
uhm i dont think you can set an alarm clock, but you can have a clock on your zune. go to settings and scroll till you see clock, click 'show clock' to yes and set the time to either 12 or 24 hour setting then set your time
It wakes you up at the time you set it to
You set the time and the screen shows what time it is.. Simple
go to apps...find clock...open clock app...click on the alarm clock icon in lower left corner and there you will find alarms with many different settings. in ICS just tap below displayed time to set an alarm.
GOAL: wake somebody up INPUTS: alarm set, clock with battery and working PROCESS: the clock arrow moves as the time passes OUTPUTS: the clock arrow reaches the set time FEEDBACK: the alarm clock alarms making a sound and somebody wake up I think that is it:) just got that question for the science HW