answersLogoWhite

0

With a Flat head Screwdriver

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Music & Radio

What notes do i use to tune a violin and can i use an electric guitar tuner?

you have to use A on the piano to tune your violin on A and put 4 fingers on E to tune E and so on and you cannot use a guitar tuner


Is melody confused with Rhythm?

Sometimes people can confuse it. The melody is what the main tune is playing (what notes are playing the main tune) . However the rhythm is how long the notes last in a bar. So if the piece was in common time the rhythm would be 4 beats per bar. Hope this helps!


What are the most accurate sounding Iris tabs and chords?

You need to tune your guitar in a wierd fashion: Tuning: D D (Tune it up to D) D (Tune this one down) D D (Tune this one down also) B (Tune This One Down too. it will be a little loose but that's how it is!) Be careful when tuning the B string up to D - it might snap. It's easy to play once you tune your guitar like this. You can also play it with standard tuning (Chords for verses are are D, Em, G, Bm, A, G) but it doesn't sound good - you need all the Ds to ring out to produce the haunting feel of the song. look on ultimate guitar.com, tab version 4 (the one with the 5 stars), to see how to play it.


How do you tune a 4 string ukulele?

There are numerous choices in the notes used to tune an ukulele. The most common is the 'My Dog Has Fleas' tuning. These would be g' c e a, where the g is actually a higher note then the C. Done this way, the top string (4) on the second fret would be the same as the bottom string (1) when open. You can tune it according to another instrument like a guitar or piano. The notes are g,c,e,a. just play the note on another instrument, and match the pitch on your ukulele, also the notes go from low to high.


Does a junior guitar go out of tune easily?

Things contributing to guitars going out of tune include: A badly cut, none lubricated nut A bad tremolo system Bad tuners Using a lot of vibrato Soo if the "junior" (whatever you mean. Gibson Les Paul Junior, 3/4 size guitar etc?) has a decent nut, tremolo and tuners it should stay in tune reasonably well.

Related Questions

Which holley 4 bbl carb was on the 1963 mercury monterey with the 390 engine?

Mercurys were equipped with Autolite 4100, if a 4-barrel, or the Autolite 2100 if a 2-barrel. The Autolite 4100 is one of the finest carbs ever made. It was designed by Holley and is a square-bore carb similar to the HOlley 4150.


How do you adjust the carburetor on a 350 with a 4-barrel Holley?

There is no simple answer to this question, as the Holley is a universal carb and can be tuned to suit most any application. There are how-to books on this subject, and highly recommended for someone trying to tune one. Also, the Holley tech service library can be very helpful. http://www.holley.com/TechService/Library.asp


You want to upgrade your 1979 ford f150 302 v8 to a Holley carb and edelbrock manifold and need advice on which to use?

i used a holly 500cfm two barrel carb on mine and it worked just as well as a 4 barrel i used a holly 500cfm two barrel carb on mine and it worked just as well as a 4 barrel


Is double pumper same as a 4 barrel carb?

a double pumper is a 4 barrel carb. commonly made by holley. they were called this because they have two accelerator pumps. one on each float bowl on either end of the carb. most carbs do not have this feature, they usually only have one accelerator pump.


Anyone know the horsepower for a 1970-1979 350 4 barrel out of a suburban?

Advertised horsepower is: 1970 is 215hp @ 4400 RPMs. 2-barrel Carb 4-Barrel carb is 225hp @ 4600RPMs. 1971 is 250hp @ 4600RPMs. 4- barrel carb 1972 is 175hp @ 4000rpms. 4-barrel carb. 1973 is 155hp @ 4000rpms. 4-barrel carb. 1974 is 145hp @ 3800rpms. 2-barrel carb. 4-barrel carb is 160 @ 3800RPMs 1975 is 160HP @ 3800 rpms. 4-barrel carb. 1976 is 145hp @ 3800 rpms. 2-barrel carb. 4-barrel is 165hp @ 3800 rpms. 1977 is 165hp @ 3800 rpms. 1978 is 165hp @ 3800 rpms. 1979 is 155hp @ 3600 rpms. 4- barrel Hi Altatude engine. 165 @ 3800 4-barrel carb heavy duty engine.


What would cause the vacuum secondaries to kick in too early on a 1976 F-150 390 V8 with a Holley 4 bbl?

for a start a holley needs tuning nearly every week. the 390 did not have a holley as standard, but the holley carb is a cheap replacement. find a mechanic that knows how to tune a holley and that may fix the problem. holley carbs are good on race cars ,especially when there is time between races to retune them.


What engine did the 1968 Chrysler Newport have?

The 1968 had 1 of 3 engines a 383 2 barrel carb, a 383 4 barrel carb, or a 440 4 barrel carb.


Will a holley 4 barrel make more power than a stock 4 barrel?

The answer is yes, it will produce more power than a stock 4 barrel.


How would the performance change if you changed from a 2 barrel carb to a 4 barrel carb on a stock Chevy 400ci?

A four barrel carb usually adds about 20 hp.


What type of carburetor can you get for a Buick Skylark sraight 6 motor?

sounds like a chevy motor 250 cid. you can go original which was built by rochester, believe it or not a decent parts store could hook you up. if you want a bit more power tou can look at summit racing or jegs. holley, carter, edelbrock all make something for you motor you can even by a 4 barrel intake manifold and carb for about 50 more horse power , my suggestion by a nice holley 2 barrel carb and a carb adapter


What type of carburetor can you get for a 1969 Buick Skylark sraight 6 motor?

sounds like a chevy motor 250 cid. you can go original which was built by rochester, believe it or not a decent parts store could hook you up. if you want a bit more power tou can look at summit racing or jegs. holley, carter, edelbrock all make something for you motor you can even by a 4 barrel intake manifold and carb for about 50 more horse power , my suggestion by a nice holley 2 barrel carb and a carb adapter


Can you replace a 2 barrel carb with 4 barrel carb on a ford 289?

Yes , but you also have to change the intake manifold