answersLogoWhite

0

From the Service Manual Vol 5 of 5

1. Remove the Cluster Bezel by applying parking brake, move shift lever (automatic) all the way down, tilt the steering wheel to full down position, Gently pull rearward on the corners of the bezel from the instrument panel assembly, remove bezel

2. Remove 3 screws

3. Pull out slightly to gain access to connectors

4. Disconnect the wire connectors

5. Disconnect coaxial cable from radio (Non-Digital)

6. Remove radio

Install is just opposite from removal

screw tighten to 14 lb in, don't use paint, lube, corrosion inhibitors, locking compound

Make sure all clips are in place on the bezel

User Avatar

Wiki User

17y ago

What else can I help you with?