http://techinfo.Subaru.com/html/ixSearchFree.jsp?publication_type=12&text_keyword=&keyword=&free_pub=13 Search for the subwoofer installation. They are the same from 2004-2008, get the 2008 one, it is a cleaner scan.
Pull the knobs off and there will be a nut behind each. Remove the nuts and the radio will slide back. Remove the side carpet walls by the shifter console and the radio can be removed from either side, passenger prefered.
you can't do it yourself you have to get help from a pro
look on top of the radio there is a tray. grab the top of the tray and pull out there are clips that hold it together then just let it hang from the wires you will see the radio on brackets then just remove the 4 bolts from the bracket and pull the radio out dont forget to remove the conncetions on the back. once you remove the radio there are 4 screws on each side of the radio that is holding the radio to the bracket. remove those to remove radio from bracket. dont lose those screws your going to need them to install on new radio. any more questions e-mail emezahth@gmail.com
I have detailed step by step instructions, along with pictures, on how to remove your dash and center console for the 07' Dodge Ram 1500 Laramine package. These instructions are for the center, non flip down style, console. Please e-mail me at jdhoff87@yahoo.com if you want me to send the Word document to you. I knwo how it was to figure out how to do it with no instructions, so I know your hassel.
I got the dealership service department to print out instructions for me, but here's what I remember: Take the center console out by taking out the storage between the seats and unscrewing it there. Then you'll have to get the gear-shift knob out by putting the car in neutral and pulling strait up on the gear-shift. Remove the screws from the bottom of the console by removing the small panel under the emergency brake. slide off the fascia on the top of the radio under the air vents to reveal other screws. The console will just POP off. Then you can remove the radio. See if the dealership will print you some instructions. Good luck!
It takes about an hour to install and you need to remove the console and radio to install (at least this is the easiest way I have done and seen)
To remove the radio remove the mounting screws for the center console. Pull the center console off the 2005 Acura TL. Remove the rest of the mounting screws and pull the radio.
Remove the trim plate from the shifter. Remove the instrument/radio trim plate. Remove the right side console extension panel. Remove the heater duct. Reach behind the radio and remove the antenna lead. Remove the radio retaining screws. Pull the radio out and disconnect the electrical connectors. To install the CD player you will to buy an installation kit for a'89 Grand Am (it will have all the parts to mount the CD player and instructions how to install it)
I have a 2004 Malibu and trying to remove the radio/defrost control console
Remove the 1994 be a week Century radio decorative cover. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.
The radio on a 1987 Honda Civic is held in place by the center console. First remove the center console to reveal the several mounting screws holding the unit in place. Remove the mounting screws and pull the radio out of the car.
The radio on a 2007 Hyundai Tucson is positioned inside the center console. The console will need to be removed so the mounting screws for the radio bracket can be reached. Loosen the bracket screws to holding the radio and disconnect the wiring. Pull and remove the radio.
The radio unit on a Hyundai Elantra is held in place by a mounting bracket found behind the center console. First remove the center console then remove the screws on the mounting bracket. The radio will be able to slide forward. Once pulled out remove the wire harness that plugs into the radio.
Remove the decorative cover to the radio. Remove the radio retaining screws. Pull the radio out and remove the wiring harness. Remove the radio antenna cable. Reverse the process to install the new radio.
ÊUsing a screwdriver, remove the screws from the center console panel.Pull the panel off,use the screwdriver to remove the screws holding the radio in place, pull the radio out and remove any wiring connections.Ê
how do you remove a 1999 vw passat radio
Remove the radio retaining cover. Remove the radio retaining bolts. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.