0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you clear code wait after entering the wrong radio code on BMW roadster?
If it states code wait on the radio then you must turn the key to the first click or position in the ignition then allow the vehicle to sit for 1 hour. After 1 hour you will be able to re-enter your code incorrectly up to 3 times before it will state code wait on the radio again.
How do you enter Nissan navara D22 radio code?
To enter radio codes for your Nissan Navara D22, check the owner's manual. There will be specific instructions on how to enter your code correctly.
You have entered the radio code for the E320 what next?
the radio wil blink "code" enter the code and then push "ok" the radio should come back on unless you have attempted to enter the incorrect code too many times- in this case you will have to wait for the radio to reset itself (this can take anywhere from 10 min to 5 days.
How to enter the radio unlock code on a 1994 Acura Integra?
You must go to a dealer. They will give you a code. All you do is turn the radio on, punch in the code, wait a couple seconds and it will come on. You will need proof of ownership of the vehicle to get the code.
Jeep radio broken says wait 2 hrs?
It's not broken, the power has been disconnected(flat battery, radio removed, blown fuse). Just do as the radio says, turn the key to the auxillary position, switch the radio on, wait 2 hrs and then enter the code.
1990 Mercedes 300e how long does it take to get radio set up?
Son bought used 300e. Called dealer for info on radio code, which he now has . He was told to turn on radio and wait it the radio shows enter access code. We have left the radio on for hours and nothing. So help please!!!!
Mercedes radio slk stays on wait?
If you've recently interrupted the power supply (battery) then you will need to input the radio code. The code should be in your paperwork, if not, contact your dealer for the code. The "WAIT" code on the radio means you have input the wrong code more than 3 times and you have to wait 10 minutes before attempting to enter radio code.
How do you enter radio codes for 1990 190e?
Turn your ignition swith to on position,turn your radio on,code should appear on the screen of your radio. After code appears,enter first digit of your code. wait for first digit to flash. Then enter second digit,wait for flash,Then enter third digit,wait for flash. Then enter fourth digit, wait for flash. Then push * on your radio to except the code.
How do you clear code wait after entering the wrong radio code on BMW roadster?
If it states code wait on the radio then you must turn the key to the first click or position in the ignition then allow the vehicle to sit for 1 hour. After 1 hour you will be able to re-enter your code incorrectly up to 3 times before it will state code wait on the radio again.
How do you enter Nissan navara D22 radio code?
To enter radio codes for your Nissan Navara D22, check the owner's manual. There will be specific instructions on how to enter your code correctly.
How do you get the wait signal off the radio on ML 350?
Turn the ignition lock on and the radio on and wait. It can take up to a couple of hours depending on how many times the incorrect code has been inputed in the radio.
How do you reset radio code in a BMW?
To set your radio follow this procedureTurn car onTurn radio on, then off.Turn radio back on, a message CODE will appear.Enter code using the preset buttonswhen finished entering code, press the > button and you will hear sweet sounds of music!**if your radio says CODE WAIT, you will have to wait for an hour or so for the car to reset the code. There is NO WAY around this if your radio says CODE WAIT**If you do not have the code for your radio,Find out what model you have:turn car onturn radio on, then offTurn radio back on and press and hold the M button for 10 secondsa code will display on the radio with your model number of the radio.Call your local BMW dealer and tell them you have the serial # for the radio and need the code, be nice. If they cant/ wont give you the code, look up another dealer and call them, continue to call until a nice dealer gives you the info DO NOT PAY FOR IT!Source(s):Have owned many cars including 6 BMWs and 2 Mercedes
You have entered the radio code for the E320 what next?
the radio wil blink "code" enter the code and then push "ok" the radio should come back on unless you have attempted to enter the incorrect code too many times- in this case you will have to wait for the radio to reset itself (this can take anywhere from 10 min to 5 days.
How do you enter the code on your radio after disconnecting and connecting the battery back on the 1993 XJ6?
Turn the key to acc to allow the radio to come on, wait for it to display CODE, and then enter your 4 didgit radio code. If you make a mistake, turn the key off and on, and try again. If you make 5 mistakes, turn the key on to acc, wait 1 hour, and it will reset.
How do you reprogram your 1998 bmw's 323 ci stereo it reads code wait?
Unfortunatley you have to go to the dealer for this one. They will have the code there. They type in your VIN and the radio's serial number and give it to you without hassle. You should have received a little business card with the radio serial number and the radio code when you bought the car. If the display reads WAIT...that means the incorrect code was entered 3 times incorrectly and now the radio is waiting for approximately 1 hr before allowing you to re-attempt entering the code. Unfortunately, powering off the car, or disconnecting the battery causes the radio to restart the 1hr wait. I received the wrong code card with my car, this happened when I swapped out a dead battery. I eventually got fed up enough with it and decided to yank out the radio and put an aftermarket stereo in it. When I yanked out my radio, there was a sticker on the radio with the correct code. kinda defeats the purpose of having a security code. -Brian
How do you set Hyundai excel radio code?
The code is 4 digit long, each radio has its own code, to set code: Say the code is 2418 using the station preset numbers press #1 x2 press #2 x4 press #3 x1 press #4 x8 the number should be on the LCD then press #5 once. If you incorrectly enter the code 3 times the radio will shut off and you will have to wait an hour before you can try again.
Why would Mercedes Benz C280 show Wait on radio when battery hasn't been touched?
its a security feature and you will need the radio code to unlock it.
