-- If you mean "amplifier" stages, then there are at least 8 to 10 of those in
any radio transceiver.
-- If you mean "amperes" of current, then that's not something that's "in" anything.
It's the result of a voltage source supplying electrical power to something.
-- There's no such thing as a "hi power" CB radio. Almost all of them generate the
legal limit of 5 watts in the transmitting mode, and a radio that generates more
can't legally be sold or operated.
The Connex 3000 is manufactured to operate in the 10-meter Amateur band. In
order for it to operate in the 11-meter CB band, you have to get inside and modify
it, which immediately makes it illegal for CB operation. The fact that the add-on
accessories available for this radio include a Krazy Kat sound effects board shows
what kind of people you're dealing with when you get involved with this product.
They're the ones who know that they want a fart board in their radio, but aren't
too sure how many amps are in there.
May their grid leaks saturate the floor mats in their cars.
12 watts
1.25 amps
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
It depands on the power of the loudspeakers.
It is okay sometimes to use a power supply that allows for more amps than your device. You have a good chance of burning up your converter because the printer wants more amps than the power supply can give. It is okay sometimes to use a power supply that allows for more amps than your device. You have a good chance of burning up your converter because the printer wants more amps than the power supply can give.
Power equals voltage times current in amps. The value of amps used is needed to do the math.
12 watts
No! CB power amps are very unlawful, and they can interfere with legal radio communications. (Like Amateur Radio)
Since power = current x voltage, you would divide the power (watts) by the voltage. The answer would be 1/10 amps or .10 amps.
1.25 amps
The easiest way would be to hook your hot to your battery, run that wire through the firewall into the passenger compartment, and run an inline fuse in the wire to your CB at some point (for a regular CB radio, five amps should be sufficient - for a converted 10 meter radio, such as a Connex 3300HP, you'll want to go 8 - 10 amps). Then you ground the wire to a bolt which you can complete a ground with.. you can use a DMM (digital multimeter) to determine where a sufficient ground may be found at. You can also wire it into your fuse panel (the cigarette lighter is a commonly used one).
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
lincoln has a standard radio which has a booster amplifier mounted in truck behind carpet of rear seat. there are no power amps like bose in each speaker it just boosts stock radio output from amp to speakers
The power required to run a basic computer will be 1.35 amps for startup and .7 to .9 amps continuous. The power requirements to run an 17" monitor will be 3.5 amps startup and 1.5 amps continuous.
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
where is the location for the radio fuse in a 2001 Chevy tracker
power in watts = voltage in volts x current in amps. or power in watts = current in amps x (resistance in ohms) squared i think what you meant was power in watts =(current in amps)squared x resistance in ohms