answersLogoWhite

0

RFID tags are polled input devices. The computer must send out a radio frequency polling request and any RFID tags that recognize the request transmit back their reply code (including ID info.). The computer must then sort out the various codes it received back. If there is more than one RFID tag responding at the same time, this sorting must still be performed successfully at the computer so that all RFID tags will be correctly logged.

User Avatar

Wiki User

8y ago

What else can I help you with?

Continue Learning about Music & Radio

What is the Difference between linear IC and digital IC?

Both linear ICs and nonlinear ICs has an output voltage which is dependent on the input voltage. However, the difference is that linear ICs produce an output voltage which increases or decreases at a "fixed rate" relative to the input voltage. Nonlinear ICs do not do this. A voltage regulator may be considered nonlinear because as you increase the input voltage the output will climb at the same rate (just like linear ICs), however, once the input voltage reaches a particular level point, the output no longer increases as you increase the input. This is at the point where regulation begins. The nonlinear IC no longer changes its output at a fixed rate relative to the input.


How an amplifier can be converted to a oscillator?

By introducing positive feedback from output to input


How do you plug a microKorg into a boss loop pedal?

Microkorg output to boss looper input.


Why an open ttl gate behaves as a logic high input?

because TTL have a bias input setup to eliminate noise therefore the output will follow the logic one input if left open


Is there electric guitar than can plug to 220 volt outlet?

Electric guitars were not generally designed to plug into anything to make them powered. It is a lead that is required to send the signal from the guitar pickups to a powered amplifier. Having said that, any electric device can be plugged into any socked based on the power input required by that device. Plugging any device in an outlet with a different power output requirement may damage or destroy the device.