0
no
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where on a violin would you find a peg?
There are five pegs on a violin: four tuning pegs which are used to tighten the strings and one peg which is known as a sound post which is inside the body of the violin.The sound post is necessary to transmit vibrations from the strings, which come down through the bridge, from the front to the back of the instrument.
What is a sound post?
The sound post is the cylindrical piece of wood set upright inside of the violin to keep the body from collapsing from the string tension
What is the most important part of the violin?
Well I think the strings are as you cannot play the violin without the strings. from the belt man. Also the sound post in the violin is a major player in the sound making process
What is the stick inside a violin called?
The short wooden stick inside a violin, which is wedged between the front and back of a violin - just under the bridge for the strings - is called the sound post.If the sound post becomes loose - or even falls out through one of the f-shaped sound holes which are cut into the front of the violin - the sound produced by the instrument would be greatly reduced because there is no way for the vibrations from the strings to be passed from under the bridge directly to the back of the violin.If you try to tune-up the strings and then play a violin with no sound post in place, there is a high risk that the front of the violin will soon get a bad crack in the wood. This can easily happen because the stretched strings exert a high pressure on the bridge and the bridge would be supported by nothing but the very thin wood which is used to make the top of the instrument.To re-position a loose sound post you must use a specially-made metal gadget known as a "sound post positioning tool". To use the tool, its sharp end must first be inserted into a small slit you should find in the side of the sound post. You can then use the tool to hold the sound post and pass it carefully through one of the f-shaped sound holes which are cut into the front of the violin. Then you must use the tool to wedge the sound post firmly into position between the front and back of the instrument.------------This repair should not be performed as a DIY project as damage to the instrument can occur. The cost is often minimal especially if other items are purchased or other repairs are performed.Dave Lashof
Violin after done playing should you let the bridge down?
no, the tension the strings keep on the bridge keep the sound post up: if you let the bridge down, you risk breaking the bridge, the strings, and making the sound post fall down
Where on a violin would you find a peg?
There are five pegs on a violin: four tuning pegs which are used to tighten the strings and one peg which is known as a sound post which is inside the body of the violin.The sound post is necessary to transmit vibrations from the strings, which come down through the bridge, from the front to the back of the instrument.
When a string of a violin is played with a bow the violin vibrates in a what?
The string makes the sound post vibrate, therefore the sound comes out the f-holes, which are on both sides of the violin.
What is a sound post?
The sound post is the cylindrical piece of wood set upright inside of the violin to keep the body from collapsing from the string tension
What is the most important part of the violin?
Well I think the strings are as you cannot play the violin without the strings. from the belt man. Also the sound post in the violin is a major player in the sound making process
How does a violin make a noise?
When the bow is stroked across the strings, they vibrate and the sound travels into the f-holes and bounce off against the sound post, which is a wooden stick standing up from floor to ceiling of the inside of the violin. This then travels throughout the inside of the violin, causing vibration.
What is the stick inside a violin called?
The short wooden stick inside a violin, which is wedged between the front and back of a violin - just under the bridge for the strings - is called the sound post.If the sound post becomes loose - or even falls out through one of the f-shaped sound holes which are cut into the front of the violin - the sound produced by the instrument would be greatly reduced because there is no way for the vibrations from the strings to be passed from under the bridge directly to the back of the violin.If you try to tune-up the strings and then play a violin with no sound post in place, there is a high risk that the front of the violin will soon get a bad crack in the wood. This can easily happen because the stretched strings exert a high pressure on the bridge and the bridge would be supported by nothing but the very thin wood which is used to make the top of the instrument.To re-position a loose sound post you must use a specially-made metal gadget known as a "sound post positioning tool". To use the tool, its sharp end must first be inserted into a small slit you should find in the side of the sound post. You can then use the tool to hold the sound post and pass it carefully through one of the f-shaped sound holes which are cut into the front of the violin. Then you must use the tool to wedge the sound post firmly into position between the front and back of the instrument.------------This repair should not be performed as a DIY project as damage to the instrument can occur. The cost is often minimal especially if other items are purchased or other repairs are performed.Dave Lashof
Violin after done playing should you let the bridge down?
no, the tension the strings keep on the bridge keep the sound post up: if you let the bridge down, you risk breaking the bridge, the strings, and making the sound post fall down
What the sound of violin?
It can make a high or low sound with the different strings. If you look up on a website called youtube, you might want to try searching in the search box, and type 'violin' (without the quotations of course). You will see what it sound like. Unless you cannot hear very well, it makes a similar type of ringing noise, almost.
What is the best way to amplify a violin?
the part that amplifies the sound is the body of it. the sound waves vibrate the ody which gives off a loud sound. the laurge sound comes out of the curly holes / slits at the front of the violin.
How dcoes a violin produce vibrations?
The bow pulls the string and releases it at a few hundred times a second (whatever its natural frequency is at the moment). This makes the string oscillate, with energy moving from the top of the fingerboard to the top of the bridge. This in turn vibrates the bridge, where energy moves down in through the the sound post (located under the e string). This transfers the sound to the underside of the violin. Now the sound bounces around the violin, and is amplified. The sound finally escapes through the f-holes.
What is the middle of a violin called?
The middle of a violin, where the bridge and the two "f"shaped sound-holes are, is sometimes called the belly.Depending on which side you were talking about, it can also be called "the middle of the front" or "the middle of the back".For example:"There is a nasty crack in the middle of the front, probably caused when someone tried to tune it by tightening the strings without first checking that the sound post was in place!"
How is the violin used?
It is used to make music, which is with the bow that creates the sound. It works like this: there are little microscopic hooks on the bows hair (which is horse hair), which if you use resin it makes the hooks stand up to catch the string and make the sound. The sound vibrates off the sound post inside of the violin, and it comes up trough the f shapes holes, and it creates the sound. When you put your fingers down on the finger board, it creates different high or low sounds, which are the different bases of songs. The violin usually consists of four strings, the G string, the D string, the A string, and the E string. The G being the lowest sounding and thickest string, and the E being the highest sounding and thinnest. You hold the violin and bow a specific way. And, there are many types of music you can play with the violin.
