answersLogoWhite

0

Insert the correct code. Don't know the code, contact your dealer. You can go to www.fordlockcodes.com and they should be able to get you your code.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Music & Radio

Just bought a used 2000 honda accord I have the radio unlock code but when I try to enter it it just says error e Help?

The radio unlock code could not be working for a few different reasons. One reason could be because the radio could be out of date, the other could be because it is broke.


How do you unlock gm radio when it says lnop?

To unlock a GM radio displaying "LNOP," you typically need to enter a specific unlock code. This code can often be obtained from the dealership or the manufacturer's customer service, usually by providing your vehicle identification number (VIN) and the serial number of the radio. Once you have the code, turn on the radio, press the "Seek" button, and then enter the code using the preset buttons. If you encounter issues, refer to your vehicle's manual or consult a professional for assistance.


You had to buy a new radio for your 2001 Chevy Monte Carlo you installed the radio and now it says it's locked It came from a 2001 Impala Help?

Newer radios are programmed with the VIN of the car they are in. If you have to replace the radio with a factory radio, you have to take it to your local dealer, and have them reprogram it. They might require you to show proof that the new radio is bought, and not stolen thou. But the new radio has to be unlocked thru the OBD2 port thru a GM scanner.


Jeep radio broken says wait 2 hrs?

It's not broken, the power has been disconnected(flat battery, radio removed, blown fuse). Just do as the radio says, turn the key to the auxillary position, switch the radio on, wait 2 hrs and then enter the code.


How do you unlock the radio for a 2000 Pontiac Sunfire?

try this website below (copy & paste). worked for my daughter's radio. do a web search and there are several that won't ask for $$ to furnish codes. good luck. http://www.teammiata.com/libs/radio-codes.htm

Related Questions

What does it mean when the display on the radio says lights locked?

the power has been disconnected for too long of a time and the security system on your radio was activated. look in your owner's manual for a keycode to unlock it.


How do you unlock locked Delphi GM factory radio I just purchased and received off eBay installed screen says locked?

You will have to take it to a dealer so they can reprogram it. They are locked due to a anti theft system that recognizes the vehicles VIN #.


How do you unlock your radio when it is locked on a Ford Focus?

A Ford radio usually will become 'locked' after 10 invalid codes have been entered. In the beginning, the indication like "- - -" or "Wait" may appear on the radio's display. In this case leave the radio turned on for 2-3 hours. The locked state will reset and you will be able to enter the code again. However, if 10 attempts (or more) have been made, the radio will go into the 'LOCKED' mode. Waiting will not help in most cases. But there is a trick that you can use if your radio says 'LOCKED' or 'LOCKED 10'. If you see 'LOCKED 13' or 'LOCKED FOREVER', unfortunately, this will not help. To unlock the radio if it is says 'LOCKED 10': 1. The radio is turned off. 2. Press the '6' (6th radio preset) button and hold it. 3. Do not release the '6' button. Turn the radio on while holding the '6' button. P.S. This will not help with all radios. Some systems may not support this reset trick. WARNING: After this trick is done, you have 3 more attempts. If you use them up, you will not be able to unlock the radio yourself again. NOTE: Some radios say 'TEN' instead of 'LOCKED'. For these radios, turn the radio on and hold SELECT and MAN buttons together. You will have ONE additional attempts (when it is used up, the radio will say 'TEN+').


How can you unlock your samsung gt-s5360 screenlock if you already entered your password?

how can i unlock my screen? when i go to do something in my sceen it says "screen edit locked"


How do you reset radio in a Chevy Venture?

My fuel gauge, odometer and radiator gauge isn't working and my radio says locked. How can I fix this?


How do you reset code on 94 Camry radio after it says help on the screen?

i have a 94 camry and i need the code to unlock the radio


You bought a whiteboard in Yoville- from Sale it is locked how do you unlock?

double click the whiteboard while it is being displayed and then a litle box says locked with a check click the check and it is unlocked


How do unlock the radio in a 1992 sabb?

you need to have the code for the radio to unlock the radio, without the code I'm not sure you can unlock it without sending it to a shop who can rebuild/refurbish it. If you have the code, push the band button until it says "code" you then enter the 4 digit number and the radio should unlock. If it doesn't you haven't entered the correct code. Good Luck


How do you unlock seatbelt that is locked in place?

you press the unlock button. it is generally orange and says 'press' located on the part you click the seatbelt into. If the belt won't pull out, you will need to replace it.


Honda CR-V radio says error?

You will have to insert the 5 digit code, to get the radio working again. Don't have the code, ask your dealer for help. You may need to remove the radio to access the serial #. The dealer can supply the code with that number. If you have the code, you will have only 3 tries to make it work. If you failed on the 3rd try, your radio will be locked. When this happens bring it to your dealer and they'll unlock it for you.


My pro 164 Radio Shack scanner won't scan and says all channels are locked how do you fix this?

To fix the issue with your Radio Shack Pro 164 scanner indicating that all channels are locked, first check if the "Lockout" feature is enabled. Press the "L/O" button to unlock any channels that are locked. Additionally, ensure that you are in the correct scanning mode by pressing the "Scan" button. If the problem persists, try resetting the scanner to factory settings, which can often resolve software glitches.


Can you unlock raquazar for brawl?

No you can'tI've tried but it just leads me to a screen that says character locked please go to www.nitendo.com for further notice.