you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio.-Shocker
take your VIN in to a Holden dealer, they should be able to get the PIN if the radio was originally fitted to your car. If it is no longer on file or if the radio belonged to another car originally the radio will need to be removed and the serial number sent to Holden along with your VIN. That can be expensive tho, might be worth looking at a new radio if PIN for yours is not available.
The way the signal is transmitted and processed. FM radios are transmitted via signal generators and amplifiers on the ground while digital radio like Sirius or AM are transmitted via satellites. The digital signals are sent in packets vs. lower frequency radio waves.
I dont know... but I dont think so,,, I know this wasnt alot of help to your question. That song is really good. I wish they would play it :)
It's a little piece of junk radio that has a scan button to find FM stations instead of a far superior dial mechanism. They're cheap pieces of junk generally sold at dollar stores or given out as free gifts from businesses since they're so cheaply made.
No, but they are sometimes grounded via frame vs wire. Most car radios use negative as common with ground. But caution should be taken therefore make reference to the manual before installation. This is because some radios have a low resistance on the wire marked negative which affects operation of the radio and results in impaired output.
how do I change the pads and rotors on a VS Commodore ?
Holden VS Commodore was created in 1995.
on the ground, what is the safe method to drop diff from 1996 statesman
Torque Setting for VS Commodore Harmonic Balancer Bolt- between 270-320 NM. The Best way is to check the bolt torque setting before you remove it.
How do you adjust rear band on transmission for a vs commodore 6hdd?f
Easiest way is to buy a removal tool, can get them from Ebay. But you can also use multi grips and a hell of a lot of wd40.
They are the aliens from planet marlboro
the answer is 56
You can find a wiring diagram for a VS Commodore Dash inside the owner's manual. You can also check with local auto part stores.
There are 3 different engines available to the VS Commodore. First is a 3.8L ECOTEC V6. The second is a 5L V8 and the third is a 5.7L V8 (an enlarged version of the 5L ) only available to the "SENATOR" version of the VS.
tacho surge
14.9 NM / 11lb.ft