0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the fingering for the a flat scale on a trumpet?
Ab scale on trumpet is 2/3, 1, open, 1/2, 2, 1, open 2/3
Does trumpet 1 mean you are better than trumpet 3?
Yes, the trumpet 1 part is normally harder than trumpet 2 or 3 and normally the best player or players play on the first trumpet part.
What buttons is a on trumpet?
A is 1 and 2
What is the fingering for B flat on the trumpet?
The trumpet is a 'transposing instrument'. This means that each note it produces has two pitch names: the "natural" name and the "Concert pitch" name. This comes from the history of the instrument: originally, lip-reed instruments (i.e. wind instruments using a cup mouthpiece where the vibrating part, considered the reed, is the player's lips) were made with their fundamental tone on C in the going concert pitch, and the overtones produced by overblowing were all named accordingly. Eventually, the trumpet and some of the larger lip-reeds were manufactured in families based on Bb and Eb. The player learns, for instance, the open pitches (overtones) as C, G, E, etc, even though they do not sound with those pitches in Concert pitch. For a Bb trumpet, the natural overtones of C, G, and E are Bb, F and D in Concert Pitch. A trumpet player who learns the valve positions as C, G, and E reads transposed music where C is written when the actual concert pitch wanted is Bb. This allows a trumpeter to switch to a different trumpet with a different length tube (or a valve trombone, baritone, euphonium or tuba) where the fundamental pitch is Eb or Bb at a different octave: when the concert pitch tone desired matches the named pitch (i.e., Bb trumpet, A trumpet, Eb euphonium) the player's music will show C and the player will use the same fingering (all open.) So, for a trumpet in Bb to play concert Bb, the player will leave the valves open and play the fundamental pitch or one of its octaves. A trumpet in A will require that the player produce a note a half-tone higher, so they will finger for C#. A player of the high trumpet in Eb will want to finger valves for the natural pitch of G. On the other hand, if the trumpeter is playing a Bb trumpet and is required to play a natural pitch of Bb (which would be Ab in concert pitch), the trumpeter would press down the first valve. Generally speaking, three-valve instruments are arranged so that the first valve causes the pitch of the instrument to drop by one whole tone; the second valve drops the pitch of the instrument by one half tone; the third valve drops the pitch of the instrument by a minor third (a whole tone plus a half tone). These valves are used in combination to fill in the gaps between the overtones. Often, if you have learned this, you can figure out any fingering for any note. For instance, to lower the natural C to Bb, use the first valve (whole tone down). To get A, use the first and second valves together (adding up to a minor third.) To get G#, use the first and third valves (which add to give a pure fourth down.) This means that valve positions on trumpet make more sense going down than going up! say the mouthpiece is here - o o o - and the bell is here then you need the first valve closest to the mouthpiece. you play it with your index finger. :)
What are the buttons on a trumpet called?
The buttons on a trumpet are called valves.
What are two ways pitch can be changed?
1) Doppler shift 2) shortening or lengthening the wavelength produced by the source.
What to do if he changes his ways?
i would juss talk 2 him about him like ask him y he changed his ways ..
After World War 2 many Japanese famlies changed their traditional ways?
everthing changed and it was hell for the japanese people of that time the ways that they changed were only traditional to their family or to the country.
How are the trumpet and flute similar?
There is very little similarity between a trumpet and a flute other than that they are both musical instruments, they are both constructed of metal (but different metals), and they both use air in motion to produce sound. The trumpet, however, is usually placed with the horns, or brass instruments, while the flute is considered a woodwind. The mouthpiece of the trumpet is blown directly into, the flute is blown across. The trumpet uses valves to alter the pitch, the flute, keys. The trumpet usually starts at F# (below middle C) and has a range of 2 1/2 octaves. The flute begins at middle C with a range of 3 octaves. The trumpet uses an exponentially flared horn at the exit end to amplify sound. The flute uses no amplification system. The air channel of the trumpet is coiled, the flute, straight.
What are 2 ways the Civil War changed the US?
Slavery was abolished and the Confederacy was destroyed.
List the 2 ways the earth's surface is changed?
iiddkk.haha we r not the smart peoples
List 2 ways in which the American of the 1820s had changed since 1800?
new technology
What is the fingering for the a flat scale on a trumpet?
Ab scale on trumpet is 2/3, 1, open, 1/2, 2, 1, open 2/3
What is the fingering for the a flat scale on the trumpet?
Ab scale on Trumpet is 2/3, 1, open, 1/2, 2, 1, open 2/3
Does trumpet 1 mean you are better than trumpet 3?
Yes, the trumpet 1 part is normally harder than trumpet 2 or 3 and normally the best player or players play on the first trumpet part.
What buttons is a on trumpet?
A is 1 and 2
What is the fingering for B flat on the trumpet?
The trumpet is a 'transposing instrument'. This means that each note it produces has two pitch names: the "natural" name and the "Concert pitch" name. This comes from the history of the instrument: originally, lip-reed instruments (i.e. wind instruments using a cup mouthpiece where the vibrating part, considered the reed, is the player's lips) were made with their fundamental tone on C in the going concert pitch, and the overtones produced by overblowing were all named accordingly. Eventually, the trumpet and some of the larger lip-reeds were manufactured in families based on Bb and Eb. The player learns, for instance, the open pitches (overtones) as C, G, E, etc, even though they do not sound with those pitches in Concert pitch. For a Bb trumpet, the natural overtones of C, G, and E are Bb, F and D in Concert Pitch. A trumpet player who learns the valve positions as C, G, and E reads transposed music where C is written when the actual concert pitch wanted is Bb. This allows a trumpeter to switch to a different trumpet with a different length tube (or a valve trombone, baritone, euphonium or tuba) where the fundamental pitch is Eb or Bb at a different octave: when the concert pitch tone desired matches the named pitch (i.e., Bb trumpet, A trumpet, Eb euphonium) the player's music will show C and the player will use the same fingering (all open.) So, for a trumpet in Bb to play concert Bb, the player will leave the valves open and play the fundamental pitch or one of its octaves. A trumpet in A will require that the player produce a note a half-tone higher, so they will finger for C#. A player of the high trumpet in Eb will want to finger valves for the natural pitch of G. On the other hand, if the trumpeter is playing a Bb trumpet and is required to play a natural pitch of Bb (which would be Ab in concert pitch), the trumpeter would press down the first valve. Generally speaking, three-valve instruments are arranged so that the first valve causes the pitch of the instrument to drop by one whole tone; the second valve drops the pitch of the instrument by one half tone; the third valve drops the pitch of the instrument by a minor third (a whole tone plus a half tone). These valves are used in combination to fill in the gaps between the overtones. Often, if you have learned this, you can figure out any fingering for any note. For instance, to lower the natural C to Bb, use the first valve (whole tone down). To get A, use the first and second valves together (adding up to a minor third.) To get G#, use the first and third valves (which add to give a pure fourth down.) This means that valve positions on trumpet make more sense going down than going up! say the mouthpiece is here - o o o - and the bell is here then you need the first valve closest to the mouthpiece. you play it with your index finger. :)
