answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What are bridge pins on a harp?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Music & Radio

What is another name for the harp?

A lyre.Another answer:Another word for harp is "clarsach". A lyre is not a member of the harp family.By definition, harps have strings running away from the soundboard, exposed on both sides.A lyre has strings running across the soundboard, frequently with a bridge.


Which instrument has 47 strings and 7 pedals?

harp


What string instrument has a pedestal and a crown?

The Harp


Why do the bridge pins keep popping out of your acoustic guitar when you change the strings?

As the ball end of the string begins to wear the bridge plate a common problem is flying bridge pins. Have you ever tried restringing your guitar only to have the pins pop or fly out when tuning the string to tension? Usually, when a bridge pin will not stay put, wear on the bridge plate is allowing the ball end of the string to pull up and into the plate instead of locking itself against the plate. It could also be a very poorly fitting pin. If wear on the bridge plate is extensive a bridge plate veneer or plugs can help. Another tip which is quite helpful in this instance is to bend a slight hook in the end of the string when replacing the strings. This small "hook" will help the string to catch the edge of the plate and avoid being pulled up into the plate. When the ball end of a string wants to pull into the bridge plate hole the bridge pin must then smash or wedge the string in the hole to prevent it's slippage. Ideally the ball end of the string hooks around the edge of the plate and the bridge pin holds it there. On an instrument without problems or excessive wear it is even possible to remove a few treble string bridge pins when it is strung to tension. Though I do not recommend it, it illustrates the physics.


What is an angular harp?

An angular harp is another name for an angle harp - a variety of harp where the neck runs at an angle over the resonator.

Related questions

What does a harp have on its head?

Parts of a harp: Crown - ornamental part on the top of the harp Tuning Pins Bridge Pins Neck - upper part of the harp (harmonic curve) Pedal Discs Pillar - also called column - Soundborad/SOundbox Feet - enables it to stand on its own Strings Pedals - 7 pedals


What pins do you bridge for self diagnostic mode on an EB Falcon?

sorry i don't know


What pins go to power load and ground on a bridge rectifier for building a DC power supply?

The two pins with the ~ symbol are for the AC input and the + and - are for the pulsing DC output


What is another name for the harp?

A lyre.Another answer:Another word for harp is "clarsach". A lyre is not a member of the harp family.By definition, harps have strings running away from the soundboard, exposed on both sides.A lyre has strings running across the soundboard, frequently with a bridge.


Which instrument has 47 strings and 7 pedals?

harp


What string instrument has a pedestal and a crown?

The Harp


Why do the bridge pins keep popping out of your acoustic guitar when you change the strings?

As the ball end of the string begins to wear the bridge plate a common problem is flying bridge pins. Have you ever tried restringing your guitar only to have the pins pop or fly out when tuning the string to tension? Usually, when a bridge pin will not stay put, wear on the bridge plate is allowing the ball end of the string to pull up and into the plate instead of locking itself against the plate. It could also be a very poorly fitting pin. If wear on the bridge plate is extensive a bridge plate veneer or plugs can help. Another tip which is quite helpful in this instance is to bend a slight hook in the end of the string when replacing the strings. This small "hook" will help the string to catch the edge of the plate and avoid being pulled up into the plate. When the ball end of a string wants to pull into the bridge plate hole the bridge pin must then smash or wedge the string in the hole to prevent it's slippage. Ideally the ball end of the string hooks around the edge of the plate and the bridge pin holds it there. On an instrument without problems or excessive wear it is even possible to remove a few treble string bridge pins when it is strung to tension. Though I do not recommend it, it illustrates the physics.


What is bigger the guitar or the harp?

Harp


What is an angular harp?

An angular harp is another name for an angle harp - a variety of harp where the neck runs at an angle over the resonator.


What is the birth name of Bill Harp?

Bill Harp's birth name is Harp, Rufus.


How do you use harp in a sentence?

The angel has a halo and a harp. The harp sounds so lovely.


What sound does the harp makeWhat sound does the harp makeWhat sound does the harp makeWhat sound does the harp makeWhat sound does the harp makeWhat sound does the harp makeWhat sound does the?

it sounds really good!! it kind of sounds like plucking a cello..:)