answersLogoWhite

0


Best Answer

Chiken little

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does code BAD mean on radio display?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Music & Radio

Led display out in factory radio 1998 explorer?

That seems to be quite a common problem on the 1998 models , from what I have read it is caused by bad soldered connections inside the radio.


Your radio doesn't work but the fuse to it isn't blown what does that mean?

Check to see if you are getting power to the radio input wire - if so could be a bad radio


On a 1995 Pontiac Bonneville dash lights do not come on if headlights are off radio display lights up if headlights are turned on radio display turns off and dash does not light up?

The instrument cluster lights have their own fuse. It's a 5 amp at the bottom center of the fuse block. When the lights are on, the radio draws lamp power from the instrument cluster. This allows you to dim the brightness of the radio display with the other internal lamps.


How do you fix H2 Hummer radio display light when radio works?

The problem is reported on many web sites. The power supply board for the display gets to warm and melts some of the solder connections. You will need to remove the radio from the dash. Remove the display panel from the radio and the top cover panel. When facing the front of the radio, there is a small board on the left side of the radio. It is held in place by two bendable tabs, one at the front of the radio and the other in the circle in the metal housing (both are in an area of white paint). You will also need to remove the screw in the rear heat synch. At this point, the board will be lift up easily. With a magnifing glass find any cracked or bad solder joint and touch it up. Be careful, the SMD are not glued to the board so they can slip when the solder is hot. Good luck.


Vw Jetta 02 radio doesn't play?

My 2000 VW beetle was taken into the shop about a month ago for a new transmission. After 3 weeks, it was finally fixed, but the radio and tape player will not play any music OR sound. I don't believe it's the fuse b/c the radio display will turn on just not play any music or change stations.

Related questions

What does bad LCD mean?

Liquid Crystal Display


2001 Olds Intrigue - How can I fix the odometer and radio display that no longer work?

The best way to fix a radio and odometer display that doesn't work is to check the fuses. When you replace the bad fuse then the lights should work in your dash.


2005 Chevy Cobalt is staining?

i work fro a Chevy dealer and when your display goes bad it means radio replacement time. if your dash light work and not the radio you will need to replace the radio


Led display out in factory radio 1998 explorer?

That seems to be quite a common problem on the 1998 models , from what I have read it is caused by bad soldered connections inside the radio.


Why does nothing display on the screen of a 2000 Nissan Maxima radio Everything else works properly on this factory radio cassette CD player?

The backlight lightbulb inside the stereo for the display may be burned out ( best case ) or the display itself is bad ( worst case ). How would either senerio be fixed?


How do you enter the security code on the radio of a 2002 Lancer?

The battery on our Mitsubishi Lancer 2002 went bad. Therefore, the radio does not work since you have to enter the code. The dealer taking care of Mitsubishi in our town told me we would have to pay $79 for them to remove the radio to find the code on top of the radio before they could fix it. I don't know how to enter the code, but it seems pretty bad that there is no other way to get the radio to work again!! AR 4-01-2008 There are two screws holding the facia in surrounding the radio. I would find the code thre myself to fix the radio.


What does PO361 mean?

bad code read again know such code


What does it mean when you get a error message on CD player 2007 hundai accent?

Bad disc or bad radio.


Why does the display panel show gear display data error shortly after beginning to drive then dash display and console display for gear disappear and check engine light came on and now never goes off?

Possibly a bad trans range switch, or bad IP, need to scan and see what code is for ck engine lite.


Your radio doesn't work but the fuse to it isn't blown what does that mean?

Check to see if you are getting power to the radio input wire - if so could be a bad radio


On a 1995 Pontiac Bonneville dash lights do not come on if headlights are off radio display lights up if headlights are turned on radio display turns off and dash does not light up?

The instrument cluster lights have their own fuse. It's a 5 amp at the bottom center of the fuse block. When the lights are on, the radio draws lamp power from the instrument cluster. This allows you to dim the brightness of the radio display with the other internal lamps.


How do you fix LED light for station selector and clock in 1990 Ford F-150 pickup Radio wtape player works perfect except the small window for station and clock display does not light up?

It's probably a bad connection. If you feel up to it, you could take the radio apart and re-seat the ribon cable that feeds the display assembly. Remove the radio, take the top plate off and you can replace the bulb for the display.