0
What happens if you put your hand between the transmitter horn and the receiver horn?
Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you power a radio transmitter without electricity?
by using a old hand cranck
How do you hold a cello?
between your legs with right hand on bow and left on instrment
In witch hand dose tylor swift write with?
Katy writes with her right hand Katy writes with her right hand
Why did Michael Jackson and Akon make song Hold My Hand?
This life don't last forever (hold my hand) So tell me what we're waiting for (hold my hand) We're Better off being together (hold my hand) Than being miserable alone (hold my hand) Cause I've been there before And you've been there before But together we can be alright. Cause when it gets dark and when it gets cold We hold each other till we see the sunlight (So if you just) Hold my hand Baby I promise that I'll do All I can Things will get better if you just hold my hand Nothing can come between us if you just hold, hold my, hold, hold my, hooold, hold my hand. (Hold my hand) The nights are getting darker (hold my hand) And there's no peace inside (hold my hand) So why make our lives harder (hold my hand) By fighting love, tonight. (sooooo) Cause I've been there before And you've been there before But together we can be alright (alright) Cause when it gets dark and when it gets cold We hold each other till we see the sunlight So if you just hold my hand Baby I promise that I'll do (If you just, If you just) All I can Things will get better if you just hold my hand (yeahh) Nothing can come between us if you just hold, hold my, hold, hold my, hooold, hold my hand. Hold my hand I can tell you're tired of being lonely (yeahhh) Take my hand don't let go baby hold me (hold mee) Come to me and let me be your one and only (hold my haand) So I can make it alright til' the morning (hold my hand) I can tell you're tired of being lonely (hold my hand) Take my hand don't let go baby hold me (hold mee) Come to me and let me be your one and only (one and only) So I can make it alright til' the morning (hold my hand) Hold my hand Hold my hand (yeahhh) Baby I promise (hold my hand) that I'll do All I can (hold my hand) Things will get better (oohhhhoooo) if you just hold my hand (ooooo) Nothing can come between us if you just hold, hold my, hold, hold my, hooold, hold my hand. (Hold my hand) Hold my hand (yeahh) Baby I promise (yeahh x4)that I'll do All I can (hold my haand) Things will get better if you just (oohhoo) hold my hand Nothing can come between us if you just hold, hold my, hold, hold my, hooold, hold my hand. Hold my hand
What is the difference between an amplifier and a receiver?
Answerit is tempting to compare a repeater to an amplifier, but the comparision is inaccurate. according to Forouzan, an amplifier cannot discriminate between the intended signal and noise; it amplifies equally everything fed into it. a repeater does not amplify the signal; it regenerates the signal. when it receives a weakened or corrupted signal, it creates a copy, bit for bit, at the original strength.a repeater is a regenerator; not an amplifiera repeater forwards every bit; it has no filtering capabilitya repeater connects segments of a LAN
How does wireless remote control for crane works?
Radio remote control: The wireless equipment or machines works on radio waves technology. The artificial radio wave is generated to control the electronic machine such as the overhead crane is called radio remote control. The overhead crane is used for industrial purposes which move and travels above the head at a particular height. The device can move the EOT crane in different directions like cross travel, long travel, and hoist. The hoist is used for lifting and lowering heavy objects. The transmitter and receiver are the two main components that are used for sending and receiving the signal for communication. The radio transmitter has various types such as 8 button radio remote, 12 button radio remote, and joystick radio remote control devices. These all types of devices have their features and specifications. Principle of wireless remote control for crane: The transmitter and receiver are used for communication to control the machines. The transmitter is a handy and small device that can be easily carried by one hand. The operator uses the transmitter device while the receiver is attached to the overhead crane. Communication happens between the transmitter and receiver when the transmitter sends the signal. Whenever the operator pushes the button on the transmitter device a data-packed is sent to the receiver in an encryption form. That means data is first converted to the cipher text from the plain text. When the signal reaches the receiver first decodes the data, the data is converted from cipher text to plain text. This encryption technique is used for the safety of data packets and the communication is not affected by the external entity. More than 10 times in a second communication happens between the transmitter and receiver. And the transmitter device can range from 10 meters to 200 meters distance for communication. While communicating with the receiver the transmitter device detects many things like how many data packets are sent, the communication, the speed of communication, the loss of data packets, successful transmission, number of errors, the signal quality, the distance, and many more. The hopping method is followed by the transmitter and receiver to circumvent unnecessary interference. The EOT crane remote control device provides the interlocked systems in a pair while in use. That means two buttons in a pair cannot be used at the same time. If an up button is pressed on the transmitter device at that time down button cannot be pressed. And we have to keep pressing the up button until the overhead reaches its destination. Features of overhead crane remote control systems: The radio remote control can range from 10 meters to 200 meters. The device uses the 2.4 GHz frequency band technology. The transmitter device is made in such a way that it prevents corrosion and shock. More than 10 times in a second communication happens between the transmitter and receiver. The communication can range from 10 meters to 200 meters. The transmitter device is highly optimized and customized while in use. The crane remote control coating is so strong that it can be used for harsh industrial conditions. The transmitter is a wireless device and works on the battery or charging systems. The remote control adjusts the power automatically according to the distance. The transmitter device works well at a very low battery also. Precedence of crane remote control: The main advantage of the crane remote control system is that it works on the battery or charging replacement system and hence the overhead crane can be operated from a long distance also. And the operator doesn't have to sit inside the crane which makes risk free. The battery used in the transmitter device is durable and can last long up to 6 months. The communication is very safe and secure between the transmitter and receiver. The communication happens rapidly i.e. 10 times in a second. The transmitter uses wireless technology for communication and if any error or lag is found in the systems then the transmitter stops working immediately. According to the distance, the power is automatically adjusted by the transmitter device. That means if the distance is less between the transmitter and receiver then less power is consumed by the device. And if the distance is far then the power is adjusted according to the distance.
What is the difference between padded receiver gloves and regular receiver gloves?
Padded Receiver gloves are padded on the top of the hand and fingers and regular receiver gloves are not padded. Both feature the same sticky grip.
What is a signal jammer?
A signal jammer or jamming transmitter is a small, low-powered transmitter that interfers with receivers in an area around the jammer. The radius of the area will depend on the power of the jammer. The jammer signal will be "seen" by the receiver and it won't then be able to "see" the little signal of the remotely located transmitter that it is trying to "look at" before you turn on your jammer. The jammer transmits a signal (without modulation - it's just the carrier wave) that radiates from the jammer pretty much in all directions (for an omni-directional antenna - which is what is usually on them). This small signal reaches all receivers within the area of its effective range and "swamps" the receivers in that area. Understand that the transmitters reaching out to receivers are generally "high power" units (their power varying depending on what they're designed to do). The jammer is low power. But because the signal from the transmitter is (almost always) a long, long way away from the receivers in the jammer's area, the signal from the transmitter is very tiny in that area. The jammer, on the other hand, has a "large" signal in that area because it's so close to those receivers. It's the amount of signal that gets to a receiver that is important. If a tiny transmitter (a jammer) is "right on top" of a receiver, it will "hit" that receiver hard compared to the tiny signal getting to that receiver from the (high powered) transmitter many miles away. The general rule for power for a transmitter getting to a receiver is that the signal strength is going to be the inverse sqare of the distance from that transmitter. That means that if you have "x" amount of signal at a given spot from a transmitter and them double your distance from the transmitter, the signal will be 1/d2 or 1/22 or 1/4th the amount you had before. Double the distance again and you're down to 1/16th the original amount of signal. A little transmitter works well to jam a receiver if it's right on top of it. It will "blind" the receiver to the "real" signal from the transmitter it is trying to capture. Jammers are generally a no-no, both ethically and legally. Use your head here and think through your options if you are planning some "experimental" electronics. It is the FCC (the Feds) that get down on individuals who interfere with communications. They play hard ball. Imagine interrupting air-to-ground communications and interfering with air traffic. They'd lock you up and throw away the key. Seriously.
How do you power a radio transmitter without electricity?
by using a old hand cranck
How small can a gps receiver be?
it can fit in the palm of your hand
What is the play when a playner exchange of the football between two players?
The exchange between the center and quarterback is called a snap, the exchange between a running back and quarterback is a hand off and the exchange between a quarterback and receiver is a reception
ANti side tone circuit in telephone is used to?
The anti-sidetone circuit in telephone is used to suppress side-tone. The anti-sidetone circuit is an assemblage of transformers, resistors, and capacitors that perform a number of functions.The primary function is to reduce sidetone, which is the distracting sound of the speaker's own voice coming through the receiver from the transmitter. The anti-sidetone circuit accomplishes this reduction by interposing a transformer between the transmitter circuit and the receiver circuit and by splitting the transmitter signals along two paths. When the divided signals, having opposite polarities, meet at the transformer, they almost entirely cancel each other in crossing to the receiver circuit. The speech signal coming from the other end of the line, on the other hand, arrives at the transformer along a single, undivided path and crosses the transformer unimpeded. The anti-sidetone circuit also matches the low electrical impedance of the telephone instrument's circuits to the higher electrical impedance of the telephone line. Impedance matching allows a more efficient transfer of energy between the instrument and the line.
What did Muhammad mean when he said the best charity is that which the right hand gives and the left hand does not know of it?
that means hide what you are giving from other people, to be secret between you, receiver and Allah. Other peole should not know.
Why won't my wireless headphones used with TV work unless I have my hand on the transmitter?
The human body can radiate radio frequencies very effectively. Many people can double the range of their car's central locking system by holding the remote to their skull. Perhaps you can make the wireless receiver more effective by adding a wire aerial loop around the skirting board with an alligator clip to the receiver's aerial. It might work?
Do you connect speakers to receiver or amplifier?
Depends on what your definition of "receiver" is, but most of the time - to the amplifier. Consider: if the receiver is some form of a device that receives some signal, and then decodes it to audio, then the receiver will hook into the amplifier, which in turn will drive the speakers (so the speakers go to the amplifier) if, on the other hand, the receiver is a part of a wireless connection between the amplifier and speaker, then it really serves the role of a cable, so in essence you're again connecting the speakers to an amplifier (only using the receiver as an intermediary) You would have to specify your case.
Can a Satellite receiver point in any direction?
A satellite receiver can be aimed in any direction if it's a swivel type of receiver or a hand held type of receiver. A mounted or fixed receiver cannot because it hasn't been designed with the capability to change direction. Usually a good receiver for televisions, telescopes, and other devices will have the ability to change their position.
Where can the serial of a browning auto 5 be found on the gun?
On the bottom of the receiver just forward of the magazine port. American A5s are on the left hand side of the receiver
