0
Depends on what your definition of "receiver" is, but most of the time - to the amplifier.
Consider:
if the receiver is some form of a device that receives some signal, and then decodes it to audio, then the receiver will hook into the amplifier, which in turn will drive the speakers (so the speakers go to the amplifier)
if, on the other hand, the receiver is a part of a wireless connection between the amplifier and speaker, then it really serves the role of a cable, so in essence you're again connecting the speakers to an amplifier (only using the receiver as an intermediary)
You would have to specify your case.
What else can I help you with?
Can you plug your Bose speakers directly into receiver?
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
I want to buy surround with sub speakers and receiver what kind of anp do i need to power all these speakers?
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
How do you connect stereo speakers to pc?
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
How do you connect speakers to sylvania TV?
If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.
Is there a way to connect speakers to a tv that has no audio outputs?
You could use an external cable or satellite receiver and connect speakers to that.
Can you plug your Bose speakers directly into receiver?
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
I want to buy surround with sub speakers and receiver what kind of anp do i need to power all these speakers?
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
How can I connect a microphone to speakers?
To connect a microphone to speakers, you will need an audio mixer or amplifier. Plug the microphone into the mixer or amplifier using an XLR cable. Then connect the mixer or amplifier to the speakers using audio cables. Adjust the volume levels on the mixer or amplifier to ensure proper sound output.
How do you connect stereo speakers to pc?
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
How do you connect speakers to sylvania TV?
If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.
Best match of amplifier with speakers?
I always try to match an amplifier or receiver that is rated within the following range: from .8 times to 1.5 times the RMS rating of the speakers. The impedance of the speakers should not be rated below 5 ohms unless the amplifier/receiver is conservatively rated as 4 ohm stable.
How do you connect an Aiwa 2.0 100w speakers to a Philips DVD player?
You need to connect the DVD player and speakers to an amplifier.
How can you connect your 2 home receivers and 2.1 hi-fi amplifier and subwoofer together?
To connect two home receivers with a 2.1 hi-fi amplifier and subwoofer, first, designate one receiver as the primary source. Connect the audio output of the primary receiver to the input of the 2.1 amplifier using RCA cables. Then, connect the subwoofer to the amplifier's dedicated sub output. For the second receiver, use its audio output to connect to the primary receiver's audio input if needed, or use a switch to alternate between the two receivers.
How do you connect your stereo equilizer?
To connect your stereo equalizer, first, ensure your audio source (like a receiver or amplifier) and speakers are powered off. Use RCA cables to connect the output of your audio source to the input of the equalizer, and then connect the equalizer's output to the speakers or the amplifier. Make sure to use the correct input and output jacks, and once everything is connected, power on the devices and adjust the equalizer settings to your preference.
How do you hook up Behringer mixer to Amplifier?
You connect the mixers main outputs to the inputs of the amplifier and the outputs of the amplifier to speakers
Can I connect two 2 ohm speakers to the front channels of my amp and then connect 2 4 ohm speakers to the rear channels of my 4 channel amp?
This depends on your amplifier's specifications. i would recommend looking in the amplifier's service manual to avoid disapointment or damage to your amplifier or speakers.
Can you connect logitech x 230 speakers to an amp?
Yes, you can connect Logitech X-230 speakers to an amplifier, but it may require some modifications. The X-230 speakers are designed for computer use and typically have a built-in amplifier, meaning they are not standard passive speakers. To connect them to an external amp, you would need to bypass the internal amplifier or use a separate audio interface that can accommodate the speakers' input requirements.
