It's a fitting most often used on fuel lines. You can tell it's a banjo because it is round and has a hole in the middle where a bolt goes through. the bolt is hollow with holes in the sides for the fuel to flow through. it is popular because you can use it in a 360 degree circle.
The banjo player singed while he play the banjo.
banjo
Drum is to beat as banjo is to pick Drum is to beat as banjo is to strum Drum is to beat as banjo is to frail
the banjo in banjo kazooie has a little sister named tootie
Ashley banjo's brother name was Jordan banjo
your answer is 3/8.....
you need three things to get an engine running: spark, air, and fuel. Included in the air section is compression. You might have an issue after the banjo fitting on the fuel system. You might have a valve/air problem. you need three things to get an engine running: spark, air, and fuel. Included in the air section is compression. You might have an issue after the banjo fitting on the fuel system. You might have a valve/air problem.
Hold the fitting still with a wrench while you turn the banjo bolt counter clockwise. You will need new copper washers when you reinstall, and the brakeline will also need to be bled.
the fuel filter should be located just below to the right of the air filter box. this is in the right side of the engine compartment. to change the fuel filter you must remove the air filter box. the top fitting is a banjo fitting and the bottom fitting is a standard screw in flared fitting.
It is on the driver side of the motor bolted to the firewall it has 2 meatl lines with banjo fitting and a nut on the top of it
The banjo player singed while he play the banjo.
banjo
Banjo threeie was never made (yet)
Drum is to beat as banjo is to pick Drum is to beat as banjo is to strum Drum is to beat as banjo is to frail
the banjo in banjo kazooie has a little sister named tootie
Ashley banjo's brother name was Jordan banjo
Dannielle Banjo.