0
Monolithic integrated circuit technology is a system of electronics that are interconnected through a single piece. This single piece is a semiconductor crystal.
Wiki User
∙ 9y ago
Wiki User
∙ 12y agoit dose not exist
Add your answer:
Earn +20 pts
Difference between an integrated circuit and transistor?
Basically a transistor is just one single component and has no function by itself, while an IC is composed of several components of various types (transistors, diodes, resistors, and capacitors) pre-wired into a specific circuit having a specific function that it performs.An IC can now have as few as two components in it to hundreds of billions of components in it, soon the technology for making ICs will probably be able to put hundreds of trillions of components in one IC and the ultimate limit is still uncertain.
How do you identify an integrated circuit from serial numbers?
Semiconductor integrated circuits usually don't have serial numbers on them with the exception of VLSIC's (very large scale integrated circuits) or microprocessors. Semiconductors almost universally have two identifiers marked on them. One is a code the manufacturer uses to identify the lot (or batch) that the semiconductor came from. The other number is an identifier that can almost certainly be used to find out about the semiconductor, discover its characteristics and what it does. That identification number can be used to cross-reference the device, and there are a number of online resources that will provide cross reference information and even device characteristics without cost save the time it takes to access the data and read it.
What are you doing to the electrical circuit in your radio when you turn the radio on and off?
When you turn your radio on and off, you are simply flicking the switch in the circuit, the same as any circuit with a switch in it. When you turn it on, the switch completes the circuit, and current can flow around the circuit.
What is the purpose of transistor?
A transistor has the same purpose(s) as a triode vacuum tube. It allowed dramatic miniaturization and efficiency improvements, especially when it was figured out how to make monolithic integrated circuits containing them.
Why TTL is preffered in case of microcontroller than CMOS?
TTL is preferred in n-mos technology because it produces more heat and thus it's preferable in microcontroller circuit but c-mos does not produce waste heat which is why TTL is not preferred in c-mos.
Do the integrated circuit and the microchip go together?
An integrated circuit can be either monolithic (all on one piece of semiconductor) or hybrid (several separate components attached to a tiny ceramic circuit board). A microchip is another name for a monolithic integrated circuit.
How did Jack Kilby help to progress of computers?
He invented a monolithic integrated circuit using germanium in 1958. While it proved the concept of the monolithic integrated circuit, unfortunately it was not practical for commercial production and sale as the electrical connections between the integrated components on the chip had to be done entirely by hand under a microscope. The first practical monolithic integrated circuit was invented by Robert Noyce in 1959 using silicon.
What is a monolithic entity?
A monolithic entity is a type of integrated circuit used in electrical engineering. It has both active and passive devices.
What is monolithic integrated circuit?
A monolithic integrated circuit is a collection of interconnected electronic devices (transistors, diodes, resistors and capacitors) all formed on the surface of a single pieceof a semiconductor crystal (usually silicon). "Monolith" means "one rock".
What are the multiple connected pathways through which electric current flows?
Integrated Circuit or Monolithic Integrated Circuit or IC is an electronic circuit set on a plate. Its microscopic pathways carries electrical currents.
What is a complex circuit of many transistors diodes resistors capacitors and other electronic devices that are formed onto a tiny silicon chip?
monolithic integrated circuit
Why p-substrate is used in monolithic IC not p-substrate?
entire circuit is built into a single piece of semiconductor (chip); physical properties of semiconductor to large degree determine performance of the circuit; the most common integrated circuits such as microprocessors, memories, etc., are all monolithic.
What is meant by IC?
An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is an electronic circuit on one small plate ("chip") of semiconductor material, normally silicon. Such a circuit can be made very compact, having up to several billion transistors and other electronic components. The width of each conductor (the line width) can be made smaller and smaller as the technology advances, and can now (in 2012) be expressed as a two-digit number of nanometers.
What is monolithic integration?
A monolithic integrated circuit is a collection of interconnected electronic devices (transistors, diodes, resistors and capacitors) all formed on the surface of a single pieceof a semiconductor crystal (usually silicon). "Monolith" means "one rock".
What are the differences between monolithic and hybrid ic?
MONOLITHIC IC It is that the components such as semiconductor materials,passive components(resistor,capacitor,inductor and transformer) etc ,which is used in ic is fabricated within the single semiconductor(say silicon) wafer and there is no such shortages between the components and this have separate pn junctions. All the functions of the components are within the small silicon wafer and the technology used here to manufacture this ic is PLANAR TECHNOLOGY HYBRID IC It is that the components are connected individualy through the wires and the surrounded by the special polymer called EPOXY ,this is the technology used while comparing with the monolithic ic it is big in size.it contain the components all such used in the monolithic type
What is a monolithic integrate circuits?
A monolithic integrated circuit is a collection of interconnected electronic devices (transistors, diodes, resistors and capacitors) all formed on the surface of a single pieceof a semiconductor crystal (usually silicon). "Monolith" means "one rock".
Which integrated circuits were used in the third generation of computers?
Both hybrid integrated circuits and monolithic integrated circuits were used in third generation computers. These integrated circuits contained from 4 to 100 transistors per integrated circuit. The image above shows hybrid integrated circuits of the type used in the IBM System 360 line of computers.
