Electronics refers to anything that requires electricity to run. A semi conductor is a material that has some properties of a conductor, meaning it allows electricity to flow through it well and some properties of an insulator, meaning it does not allow the flow of electricity through it well. Semi conductors are used extensivly in modern electronics and circuit boards.
the queastion makes no sense - check what you are asking
No it is a conductor. Aluminium wire is used in 400 amp services to keep the cost down over copper wire.
CIGS stands for copper indium gallium (di)selenide, which is a solid homogeneous mixture, and a semi-conductor. Refer to the Wikipedia article in related links.
A sharp is a semi-tone above a note. A flat is a semi-tone below a note. The difference between (for example) a D# and a Db is a whole tone. In a sense they are opposites.
semi tone or flat
A solid body guitar is just that, the body of the guitar is made of solid wood, some time one piece or a few, with no sound holes. A semi-hollow body guitar is made more like an acoustic guitar but more shallow, usually with sound holes off to the side rather than in the center as an acoustic guitar would. These sound holes are often in the shape of an "F."
an insulator doesn't allows electricity pass from it, a bad conductor allows electricity to pass from it but not fully or completely and a semi conductor pass electricity in little form which used to operate electronics
Only as a semi-conductor.
because it attracts the electric
No, sodium (Na) is a conductor not a semi conductor
The conductivity of a semi-conductor can be increased by raising the temperature of the semi-conductor .
Basically the semi-conductor junctions are a larger surface area and heat sinks are part of the design to dissipate heat.
Copper is a conductor.
Conductor-one which conducts(allow current)electric city in all condition. Semiconductor-One which behaves like conductor as well as insulator depending on condition. Insulator-one which donot conduct(allow current)electric city in all condition
a semi tone a semi tone
Semi-conductor is a material in which the energy band gap between the conduction band and valance energy band is very less (around 1V) which is in between conductors and insulators So, with just a an excitation energy of around 1v changes the state of semi-conductor to wither conductor or insulator .
semi conductor
Germanium and Silicon are the two most commonly known semi-conductor materials