They terms frequency are essentially the same, except radio waves are electromagnetic, and acoustic waves are pressure waves. An audio frequency is a range of frequencies that we can hear, approx up to 20Khz, anything past 20Khz is said to be radio waves
Generally speaking, an audio frequency is something we can hear while a radio frequency is something we cannot. With audio frequencies, something - like a whistle, drum, rock band, baby ... etc. has caused differences in the air pressure around us (or water pressure if you swim under water) which the ear can detect, and it's the rate at which these pressure variation occur which make one sound a higher pitch (frequency)than another. Radio frequency works in a similar way except it's variations in electrical and magnetic fields, not air movement, which can be detected by TV's, cell phones, HiFi's and WiFi's, etc. We can't hear anything below about 250Hz (250 Hertz or cycles (pressure waves) per second) or above about 20kHz but electrical instruments can detect frequencies as low as 0.1Hz (1 electrical/magnetic variation every 10 seconds) and as high as 10THz and these limits are still growing. I'm not sure if we could "hear" a 1kHz radio frequency without something converting the electrical/magnetic energy into air/water pressure waves!
Audio frequency refers to a frequency, or range of frequencies, which we can hear.
Video frequency implies a high frequency, or range of frequencies, usually associated with television etc.
The word "video" actually means wide band.
Audio frequency describes the frequency of longitudinal waves (pressure waves) in air or water and can be sensed directly by the human ear. Radio frequency describes the frequency of transverse electromagnetic waves by which radio signals are transmitted. These waves cannot be sensed by people and must converted to audio signals by manufactured devices before people can hear them.
Television speech are visual while radio speech are audio
A: AM radio is an Amplitude Modulation transmission . Meaning it has fix frequency but it is modulated by the signal. FM Frequency Modulation the frequency is modulated by the signal
There is no difference. Microwaves are radio waveswith any frequency above 3 GHz.
The numbers in an FM radio station represent the frequency the station transmits the signal on. The frequency range for FM band radio stations is from 87.5 MHz to 108.0 MHz. These radio frequencies are considered VHF or Very High Frequency. The difference between AM and FM radio is that in AM radio the Amplitude is Modulated, or changed to send the signal, whereas with FM, the Frequency is Modulated or altered to send the signal.
The difference between a radio wave and a x-ray is the fact that x-rays have a much higher frequency. Since higher frequency means more energy in electromagnetic waves, x-rays can be used for purposes such as taking photos of things inside the body. Radio waves are at a lower frequency and have a much longer wavelength. They are used in radio, television, and communication.
The difference between the Narrow Band radio frequency (nbfm) and the Wide Band radio frequency (wbfm) is that Narrow Band provide a higher quality of sound but has fewer channel available to use whilst Wide Band provides a lower quality of audio but has a much larger range of channels available.
what is the difference between ultrasonic welding & radiographic welding
Television speech are visual while radio speech are audio
A: AM radio is an Amplitude Modulation transmission . Meaning it has fix frequency but it is modulated by the signal. FM Frequency Modulation the frequency is modulated by the signal
radio frequency amplifier intermediate frequency( If strip) in a superheterodyne radio mixer /demodulator Audio amplifier
There is no difference. Microwaves are radio waveswith any frequency above 3 GHz.
RF means radio frequency or relativity low range of frequency microwaves however are into the top range of the spectrum or very hi frequency.
That would be sound waves, or the audio spectrum.
A watt meter measures the electric power in watts from circuits. They can measure utility frequency, audio frequency power and radio frequency measurement.
Only wavelength (frequency). Otherwise, they are the same identical physical phenomenon.
The amp for audio freq. is a AF amplifier. The RF amp is for radio freqs.
The numbers in an FM radio station represent the frequency the station transmits the signal on. The frequency range for FM band radio stations is from 87.5 MHz to 108.0 MHz. These radio frequencies are considered VHF or Very High Frequency. The difference between AM and FM radio is that in AM radio the Amplitude is Modulated, or changed to send the signal, whereas with FM, the Frequency is Modulated or altered to send the signal.