0
What is the frequency of a tuning fork that resonates with an open tube 25.0Cm long and 2.0Cm in a diameter when the temperature is 20c?
Wiki User
∙ 10y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the effect of temperature on frequency of tuning fork?
The effect of temperature on the frequency of a tuning fork is slight, for the length of the tines is little changed. A steel tuning fork would not be used as a precision frequency reference, though quite adequate for audio purposes. As the temperature increases, the lines will lengthen, and the frequency will decrease.
Does a tuning fork vibrate because of resonance?
It can, if there's another source of sound nearby, vibrating at the natural frequency of the tuning fork. Example: Two tuning forks with the same natural frequency. The first one can be set vibrating by whacking it against the edge of the table, whereupon the second one will vibrate because it resonates with the first one.
A tuning fork of frequency 300Hz will resonate if a sound wave incident on it has a frequency of what?
300Hz is the natural frequency of the tuning fork hence if a sound wave of same frequency hits the fork then RESONANCE occurs
What fundamental characteristics of the sound produced by a tuning fork depends on its frequency?
The characteristics that determine the frequency with which a tuning fork will vibrate are the length and mass of the tines.
What would be the energy transformations that occur when one tuning fork makes another tuning fork vibrate?
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.
What is the effect of temperature on frequency of tuning fork?
The effect of temperature on the frequency of a tuning fork is slight, for the length of the tines is little changed. A steel tuning fork would not be used as a precision frequency reference, though quite adequate for audio purposes. As the temperature increases, the lines will lengthen, and the frequency will decrease.
What is turning fork?
A tuning fork is a U-shaped, usually made from steel, resonator that resonates at a specific pitch or frequency when struck. It is made to tune Musical Instruments as it resonates at a constant pitch for a duration of time. It usually creates an overtone before the sound fades away. This tool is rarely used, however, as there are electronic tuning devices that are much more accurate and easier to use than a tuning fork.
What is a turning fork?
A tuning fork is a U-shaped, usually made from steel, resonator that resonates at a specific pitch or frequency when struck. It is made to tune musical instruments as it resonates at a constant pitch for a duration of time. It usually creates an overtone before the sound fades away. This tool is rarely used, however, as there are electronic tuning devices that are much more accurate and easier to use than a tuning fork.
Does a tuning fork vibrate because of resonance?
It can, if there's another source of sound nearby, vibrating at the natural frequency of the tuning fork. Example: Two tuning forks with the same natural frequency. The first one can be set vibrating by whacking it against the edge of the table, whereupon the second one will vibrate because it resonates with the first one.
Can you Break crystal by singing?
Everything resonates at a certain frequency, from tuning forks to buildings to the Earth itself. When a resonant frequency of a particular object is hit, that object with vibrate in sympathy with that frequency. If the frequency is of a high enough amplitude, the vibrations will cause an object to eventually disintegrate. So the answer is YES, if a singer (well trained) directs all of the sound energy through their vocal chords at a piece of crystal and they are singing at the PRECISE frequency that the crystal resonates at, the glass will indeed break. I've seen it with my own eyes. Hope this helps, Dr. Ron
A tuning fork of frequency 300Hz will resonate if a sound wave incident on it has a frequency of what?
300Hz is the natural frequency of the tuning fork hence if a sound wave of same frequency hits the fork then RESONANCE occurs
What fundamental characteristics of the sound produced by a tuning fork depends on its frequency?
The characteristics that determine the frequency with which a tuning fork will vibrate are the length and mass of the tines.
Two tuning forks are struck at the same timeone tuning fork has a frequency of 20 hz while the second tuning fork has a frequency of 226 hz how many beats will result?
11.3 beats
What would be the energy transformations that occur when one tuning fork makes another tuning fork vibrate?
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.
Which diode is used in frequency tuning application?
The varactor diode is used in frequency tuning applications. Its effective capacitance is a function of the reverse bias voltage across it.
What is radar tuning?
Radar receivers have to be tuned to the precise frequency of the transmitter, in order to get the best detection and thus the best picture. The transmitter generates microwaves from a device called a magnetron. The exact frequency can vary with age and temperature. To pick up the echo generated from the pulsed microwave, the receiver is able to be tuned, to allow for differences in transmitter frequency. The control on the radar receiver display, called 'tuning', actually alters the receiver frequency, not the transmitter frequency.
How can one tuning fork's vibrations cause another tuning fork to vibrate?
Vibrations are transferred from one to the other through the air. If the two have the same frequency (or a very similar frequency), resonance will occur.
