0
What else can I help you with?
1994 jeep Cherokee how do you remove the door hinge pin i only need to replace the hinge half for the door the A piller half is okay.?
Hello... I have the very same problem. To remove the hinge pin, you must heat the center of the hinge where the pin goes through, and use an air hammer with a flat pointed end. Manage the air hammer under the hinge, point on the bottom of the pin and pull the trigger. Steady the air hammer so it doesn't move around on you. ....Good Luck!!!!
1994 jeep Cherokee how do you remove the door hinge pin i only need to replace the hinge half for the door the A piller half is okay?
Hello... I have the very same problem. To remove the hinge pin, you must heat the center of the hinge where the pin goes through, and use an air hammer with a flat pointed end. Manage the air hammer under the hinge, point on the bottom of the pin and pull the trigger. Steady the air hammer so it doesn't move around on you. ....Good Luck!!!!
What Is the classification for an instrument that produces sound by vibrating a string or strings stretched between two point?
That would be a stringed instrument.
What is a small disposable instrument with a sharp point used to puncture the skin?
micropipette
What is an instrument with two blades?
An instrument with two blades is commonly referred to as a pair of scissors. Scissors consist of two cutting blades that pivot at a central point, allowing them to open and close for cutting various materials such as paper, fabric, or hair. The design enables precise control and maneuverability, making them essential tools in many settings. Other examples of two-blade instruments include certain types of knives or surgical instruments, but scissors are the most recognized.
The pivot point or hinge of lever is called the?
Fulcrum.
What is the hing?
A hinge in the body is also called a joint. It is the place where bones meet to form a bending point. The knee is a type of hinge called a joint. The jaw is more like a hinge than any other part of the body.
What is the explanation for the term 'Throw of the hinge'?
The throw of the hinge determines how the hinge opens by where the hinge is set; it is the distance from the outside edge of the hinge to its placement point on the door and jamb. A widethrow hinge sets the pintel or pivot point away from the door to allow it to open up to 180°. Wide jambs usually require a wide throw hinge to allow the door to move unobstructed.
How do you use hinge in a sentence?
Perry Mason's entire case will hinge upon this very point. The door will not swing without a hinge.
The fix point of a lever is called a?
The fixed point of a lever is called the fulcrum. A lever is a beam connected by a hinge, or pivot, called a fulcrum. A lever is used to amplify the applied force.
Why it is difficult to shut the door from a point near to hinge?
The rotational equivalent of force is called torque. It is the product of (force) x (distance to the axis of rotation) x (a function of the angle at which force is applied). You can assume the last factor is equal to 1, if the force is applied at a right angle. If the distance to the axis of rotation - the hinge - is small, a certain force produces only a small torque.
What is the purpose of a hinge on a door?
The purpose of a hinge on a door is to allow the door to swing open and closed smoothly, providing a pivot point for movement.
Why is it difficult to shut the door from a point near to the hinge?
due to torque.
What is an intermediate sight in surveying?
On a typical boundary survey the instrument is sighted on a point from which angles will be measured, the backsight, and the next survey point where the instrument will be set up to continue the survey around the property, the foresight. Intermediate foresights, often "called sideshots," are points to which measurements are made other than the foresight or backsight. For example, a survey instrument is set up over a point. The horizontal angle on the instrument is set on 0 while sighting on a backsight point that may be a couple hundred feet away. A measurement will be taken to the foresight point which may also be a couple hundred feet away. There may be a survey marker near the point where the instrument is set up to which a measurement needs to be made. This measurement is called an intermediate foresight or a sideshot.
What is hinge of a fold?
The hinge of a fold is the point of maximum curvature where the limbs of the fold meet. It represents the axis of rotation where the rock layers have undergone the most severe deformation. The orientation of the hinge can provide information about the direction and amount of strain that affected the rocks.
What kind of lever is a hinge?
A hinge is a first-class lever because the pivot point (fulcrum) is located between the effort force and the load, allowing it to change the direction of the force applied.
Why at is the name of the point were one moving part of a robot is fixed another moving part?
hinge
