0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What would be the energy transformations that occur when one tuning fork makes another tuning fork vibrate?
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.
A tuning fork of frequency 300Hz will resonate if a sound wave incident on it has a frequency of what?
300Hz is the natural frequency of the tuning fork hence if a sound wave of same frequency hits the fork then RESONANCE occurs
What fundamental characteristics of the sound produced by a tuning fork depends on its frequency?
The characteristics that determine the frequency with which a tuning fork will vibrate are the length and mass of the tines.
What is the effect of temperature on frequency of tuning fork?
The effect of temperature on the frequency of a tuning fork is slight, for the length of the tines is little changed. A steel tuning fork would not be used as a precision frequency reference, though quite adequate for audio purposes. As the temperature increases, the lines will lengthen, and the frequency will decrease.
How do you produce a note from a tuning fork?
a tuning fork is made by.....use of a specific frequency.................. tht may match the frquency of.........a boy or a girl......
What would be the energy transformations that occur when one tuning fork makes another tuning fork vibrate?
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.
A tuning fork of frequency 300Hz will resonate if a sound wave incident on it has a frequency of what?
300Hz is the natural frequency of the tuning fork hence if a sound wave of same frequency hits the fork then RESONANCE occurs
What fundamental characteristics of the sound produced by a tuning fork depends on its frequency?
The characteristics that determine the frequency with which a tuning fork will vibrate are the length and mass of the tines.
Two tuning forks are struck at the same timeone tuning fork has a frequency of 20 hz while the second tuning fork has a frequency of 226 hz how many beats will result?
11.3 beats
What is the effect of temperature on frequency of tuning fork?
The effect of temperature on the frequency of a tuning fork is slight, for the length of the tines is little changed. A steel tuning fork would not be used as a precision frequency reference, though quite adequate for audio purposes. As the temperature increases, the lines will lengthen, and the frequency will decrease.
How can one tuning fork's vibrations cause another tuning fork to vibrate?
Vibrations are transferred from one to the other through the air. If the two have the same frequency (or a very similar frequency), resonance will occur.
How do you produce a note from a tuning fork?
a tuning fork is made by.....use of a specific frequency.................. tht may match the frquency of.........a boy or a girl......
How do you determine the frequency of a tuning fork using sonometer and what are the readings of a tabular column?
Idont know
Why should tuning fork be struck gently and put over sonometer box gently?
Tuning forks should be struck gently and put over sonometer boxes gently due to the fragile nature of the tuning fork and the sonometer box. The tuning fork is a metal rod with two prongs that vibrate at a specific frequency when struck. This vibration can be damaged or distorted if the tuning fork is struck too hard. Similarly, the sonometer box is a box filled with metal strings or wires, and if the tuning fork is placed too hard or too quickly, the metal strings can be damaged or distorted. Gently striking and placing the tuning fork over the sonometer box is also important for accurate results. If the tuning fork is struck too hard, the frequency of the resulting vibration will be higher than desired, and if the tuning fork is placed too hard or too quickly onto the sonometer box, the vibrations will be distorted and the resulting frequency will not be accurate. In conclusion, tuning forks should be struck and placed over sonometer boxes gently in order to protect the fragile nature of both the tuning fork and the sonometer box, as well as to ensure accurate results.
How many times per second does a tuning fork vibrate if it is producing a sound wave in helium gas with a frequency of 384Hz?
The frequency of a wave motion is the number of waves passing through a fixed position each second. Thus, the sound wave emitted from the tuning fork has a frequency of 384 Hz means that the fork is vibrating 384 times per second.
What does the tuning fork do to produce a sound wave in the air?
Most tuning forks are designed to resonate at 440 hertz when struck. That is the frequency of the A before middle C on a keyboard or the A string on a guitar, violin, etc. You just strike the tuning fork then adjust the tension on your A string until the string vibrates at the same frequency as the tuning fork. Then you tune the rest of your strings from the A string.
Can you give me the word tuning fork in a sentence?
I can say tuning fork.
