0
What else can I help you with?
How long is a Gibson Flying V?
24 and 3/4 inches is the scale length (distance from nut to bridge), not the overall length of a Gibson Flying V. I don't know the exact measurement, but it must be approximately 45 inches.Suggest you call a Gibson dealer with one in stock and ask them to measure it.Don't bother going to Gibson's web site because they don't list the overall length from tip of headstock to bottom tip of wings.
What are the strings at the bottom of the snare drum?
The strings at the bottom of the snare drum are actually called "Snares". The tightness of the snares determines the length of the "chh" sound you hear when the drum is hit.
How do you calculate the mensur of a guitar?
To calculate the mensur of a guitar, measure the length from the bottom of the nut above the first fret to where the string actually sits on the saddle of whatever bridge it is.
What are the dimensions of a Gibson flying v?
I don't have access to a Gibson Flying V right now but here are the dimensions I've been able to gather. I'm also making one. Most of my measurements are from a 1958 Korina. NECK: Headstock 7" tip to nut Headstock angle 17 degrees Scale length 24.75" Fretboard length 17.8" from nut to 22nd fret. board should be ~18" Fretboard Width 1 11/16" at nut 2 1/4" at 22nd fret BODY: Centerline Length 11 1/4" from the crotch of the V to the point where the upper curves end Width of body at shoulders (by neck).. where the curves turn into the outside strait length of the wings. 4 25/32" Curve radius for wings and crotch 1" radius (they follow contour of a 2" diameter circle) Outside Length of wings 19" flat.. from the start of the curves Height of wing, from centerline to the topmost or bottom most point of wings. 8 11/32" thickness of body 1 3/4" (I'd verify this if I were you) Blueprints are available online if you look around. There is a vendor on Amazon but they don't specify whether they're based off the '58 Korina or later models. There are also several vendors who sell templates.
What is the difference between a fender telecaster and a fender stratocaster?
Epiphone is to Gibson like Adult Swim is to Cartoon network. Gibson is Epiphone's parent company. Gibson runs Epiphone. Epiphone make toned-down versions of Gibson guitars that are substantially cheaper and still have excelent quality. If you're looking to buy a Gibson but don't have a few grand to spend, buy an Epiphone and you will be very happy. Most people can't even tell the difference. Epiphone is the same thing as Gibson, but epiphone has the right to make the same guitars as Gibson, but just for smaller prices.
How long is a Gibson Flying V?
24 and 3/4 inches is the scale length (distance from nut to bridge), not the overall length of a Gibson Flying V. I don't know the exact measurement, but it must be approximately 45 inches.Suggest you call a Gibson dealer with one in stock and ask them to measure it.Don't bother going to Gibson's web site because they don't list the overall length from tip of headstock to bottom tip of wings.
Is the length of the figure the bottom or side?
It can be either, though often it is the bottom.
Will a manual transmission from a 1980 el Camino fit a 1980 Pontiac firebird?
Does your Firebird have a Chevy or Pontiac motor in it?If it is a Pontiac motor, you will need an adapter from Summit or Jeg's.Also, it could be a different output shaft length and spline count.
What is the length of the bottom of the rectangle, in inches?
10
What are the specific measurements of a Gibson Les Paul guitar?
The specific measurements of a Gibson Les Paul guitar typically include a scale length of 24.75 inches, a body length of around 16 inches, a body width of about 12.75 inches, and a body thickness of approximately 2 inches.
What is the formula for the area of a picture frame?
Multiply the length of the side by the length of the top or bottom.
What is the recommended bottom bracket size for a square taper crankset with a spindle length of 73mm?
The recommended bottom bracket size for a square taper crankset with a spindle length of 73mm is a 68mm bottom bracket.
Can a person switch a 700r4 out of a pontaic firebird in to a 1989 Chevy pick up if so what has to be changed?
NO. The car and truck transmissions are a different length.
How do you measure the bottom bracket spindle length accurately?
To measure the bottom bracket spindle length accurately, you need to remove the crank arms and measure the distance between the inner faces of the bottom bracket shell. This measurement will give you the correct spindle length needed for your bike.
What Are the qualities of Gibson electric guitar?
I've played a Gibson SG for years, I prefer the 24.75in scale length compared to Fender Stratocaster's 25.5in scale length. I also prefer the fuller sound that humbucker's get comapared to single coil pick-ups. They can be a little over priced, but overall wonderful guitars.
What are the dimensions of a Gibson Les Paul guitar?
The dimensions of a Gibson Les Paul guitar typically include a length of around 40-42 inches, a width of about 12-13 inches, and a thickness of approximately 2 inches.
What is the length of a metric bolt?
bottom surface of the head to the end of the threads
