0
hi man if you have power going to the speakers like when you touch a battery to it, then your problem are most likely your transistors are bad which mean you should attempt to change or trow amp away.make sure if you decide to change take the exact number off it or try subsituties.
What else can I help you with?
How do you make a bass amp sound like an electric guitar amp?
If you are using a guitar amp as a pre-amp to a bass amp (plugging your guitar into a guitar amp, and then patching the guitar amp to the bass amp), do not do this. Bass, acoustic guitar, and vocals (mics) are low impedence, where guitars are high impedence. You can very easily damage your equipment doing this sort of thing. If you are trying to get guitar sounds out of a bass amp, in my opinion, it's next to impossible. There is only one type of bass amp that I know of that you can accomplish this with...Ampeg has a series of bass amps with "switchable tweeters", meaning that they come equipped with tweeters, but you can turn them in order to use rig as a bass amp, and turn them on in order to play an acoustic guitar thru the bass amp. Since an acoustic guitar is low impedence, this works fairly well. You can also plug in an electric to this setup, even tho an electric guitar is high impedence...It's possible to plug in a high impedence instrument into a low impedence amp, but it's not advisable to plug in a low impedence instrument into a high impedence amp.
How would you spell a guitar feedback sound?
Basically you play a note or chord (chord works best) and hold it, let it ring, then you go right up to your guitar amp and hold the guitar right up to the speaker then you slowly turn the volume on the amp up until you hear feedback. And, while the guitar is feeding back, you can shake the guitar, or wiggle the volume knob a little to get a tremolo effect. Just mess around and experament.
How can you make your guitar amp quieter?
turn it down
Why do closed back guitar amps sound better than open back guitar amps?
On a closed back amp, more of the sound comes out thru the front of the amp, as opposed to escaping out the back of an open back amp.
Why does audacity make a muffled sound when you record your guitar which is in my?
My electirc guitar sound really muffled on Audacity as well miking the amp.
Is there a way to make a guitar amp sound like a bass amp?
If this means you are using a guitar amplifier to power an electric bass, stop this immediately. Guitar amps are not designed to handle the low register of a bass, and you can blow out your speakers. If this means you are using a guitar amplifier to power a guitar, but want a more bass-like tone, turn down the mids and highs and turn up the lows on your EQ. That should do the trick.
How can I optimize my guitar sound by using a bass amp instead of a guitar amp?
Using a bass amp instead of a guitar amp can optimize your guitar sound by providing a deeper and richer tone with more low-end frequencies. The bass amp's larger speakers and power handling capabilities can enhance the overall sound quality of your guitar, especially for genres like rock and metal. However, be mindful of potential differences in tone shaping controls and adjust them accordingly to achieve the desired sound.
What should you do so that sound will come out of the amp and what should the volume be on the amp and guitar?
You need to plug the Amps power cord into the wall (or multi-box) and you will need to flick the power switch. The guitar lead will need to be plugged into the input (little round hole in front of guitar amp), and into the guitar. As to the volume, it is up to personal preference. If you want it loud, turn it up loud. I like to set my guitar volume to 8 or 9. and then change the amp volume until it is the right volume.
Can you plug a bass into a guitar amp?
Yes, you can plug a bass into a guitar amp, but it may not produce the best sound quality due to differences in the instruments' frequencies and power handling capabilities.
What are the differences between an amp head and an amp, and how do they affect the overall sound quality of a guitar setup?
An amp head is the part of an amplifier that contains the controls and power source, while an amp includes both the head and the speaker. The amp head affects the tone and power of the sound, while the amp's speaker affects the overall sound quality and volume. The choice of amp head and speaker can greatly impact the sound quality of a guitar setup, with different combinations producing varying tones and levels of clarity.
What is an amp head and how does it contribute to the overall sound of an electric guitar setup?
An amp head is the main component of an amplifier that controls the tone and volume of an electric guitar. It amplifies the signal from the guitar pickups and shapes the sound through various controls like EQ settings and gain levels. The amp head significantly influences the overall sound of an electric guitar setup by determining the tone, clarity, and power of the sound produced.
How do you make a bass amp sound like an electric guitar amp?
If you are using a guitar amp as a pre-amp to a bass amp (plugging your guitar into a guitar amp, and then patching the guitar amp to the bass amp), do not do this. Bass, acoustic guitar, and vocals (mics) are low impedence, where guitars are high impedence. You can very easily damage your equipment doing this sort of thing. If you are trying to get guitar sounds out of a bass amp, in my opinion, it's next to impossible. There is only one type of bass amp that I know of that you can accomplish this with...Ampeg has a series of bass amps with "switchable tweeters", meaning that they come equipped with tweeters, but you can turn them in order to use rig as a bass amp, and turn them on in order to play an acoustic guitar thru the bass amp. Since an acoustic guitar is low impedence, this works fairly well. You can also plug in an electric to this setup, even tho an electric guitar is high impedence...It's possible to plug in a high impedence instrument into a low impedence amp, but it's not advisable to plug in a low impedence instrument into a high impedence amp.
How would you spell a guitar feedback sound?
Basically you play a note or chord (chord works best) and hold it, let it ring, then you go right up to your guitar amp and hold the guitar right up to the speaker then you slowly turn the volume on the amp up until you hear feedback. And, while the guitar is feeding back, you can shake the guitar, or wiggle the volume knob a little to get a tremolo effect. Just mess around and experament.
How do you make an electric guitar work?
You need a working amplifier. You plug the amplifier into an electrical outlet, then you plug the guitar into the amp (via a patch cord). Turn on the amp, turn up the volume and you are good to go. Use what ever is available to make the strings sound.
Can you plug a bass into a guitar amp and still get good sound quality?
Yes, you can plug a bass into a guitar amp, but the sound quality may not be optimal. Bass amps are designed to handle the lower frequencies of a bass guitar, providing better sound quality and preventing damage to the amp. Using a guitar amp for a bass may result in distorted or muddy sound due to the amp's inability to properly handle the bass frequencies.
Can you plug a microphone into a guitar amp?
Yes, you can plug a microphone into a guitar amp using a microphone cable and the amp's input jack. However, the sound quality may not be optimal as guitar amps are designed to amplify the sound of electric guitars, not microphones.
Why is my guitar not producing sound when I try to play it through the amp?
There could be several reasons why your guitar is not producing sound through the amp. Check if the amp is turned on and the volume is up, the guitar cable is properly connected, the guitar's volume and tone knobs are adjusted correctly, and the amp settings are appropriate for the guitar. If these steps don't solve the issue, there may be a problem with the amp, guitar, or cable that requires further troubleshooting or repair.
