Where do you put freon in on 1995 Jeep Cherokee?

Answer 1

charging ac 97 jeep grand cherokee

Addendum: Be advised that it is a closed system and need for recharging signals leaks at seals and/or components, e.g. evaporator.

**********************************************************

Hello, I just recharged mine last year because it doesnt seem to get as cold as it did a couple of years ago when we first bought it. After recharging the air did not seem to be extremely cold as we thought it would be. on extremely hot days it seems like no end to getting the inside to get real cold. Ok first go to the parts store and buy a kit that has the hose with a gage on it and 2 lines coming from it. the kit should come with the refrigerant in it. The gauge has four colors on it. red= danger,yellow=overcharge,blue=just right, green=needs charging.a small pamplet should come with better description.Lift your hood on 97 Jeep Grand Cherokee, look to the left side near condensor there will be a ac line silver small diameter, there will be a blue cap to unscrew. this will be the place where freon will go in.now back to gauge. take 134a refrigerant can and at one end of gauge unscrew vavle out. connect can to this end and screw valve completely shut and it will pierce freon can and open it.before connecting hose to ac line leave valve shut with no freon can attached and check ac line with your gauge be sure ac inside vehicle is running wide open to get proper reading on gauge. add freon if needed. instructions tell you not to overcharge system that it is dangerous. if you get a reading in red zone or above blue zone and air is not cold you need to take to dealer and have them test your system. if freon needs to be added follow above steps attach hose to ac line where i stated, then unscrew valve and watch gauge and do not overcharge ac. when you have proper reading on guage close valve and remove guage.please be extremely careful.

Answer 2

The low pressure port on the right (passenger) side of the vehicle near the fire wall. The port is very near the coolant recovery tank. Make sure you do not turn the freon can upside down and pour in liquid while the engine is running or you will junk your pump.

Answer 3

how do you put freon in a 1998 chevey blazer v6

You can purchase a kit from your local auto parts store that will give you the freon, the hose, low pressure gauge, quick connect fitting and directions to fit your vehicle.