If the central locking is still working, then the easiest way to work this out is to pull out each fuse, one at a time only. After you pull one fuse - check the central locking to see if it still works. When the central locking goes dead - that's the fuse that controls it.
The other way around - if the central locking is not working - then pull one fuse out at a time and visually inspect it to see if its blown - make sure you replace the fuse with one of the same amperage - ( they will be marked like , 10A for 10 amps, 20A for 20 amps. ) if there are no markings on the fuse - then make sure that if you pull out a RED fuse then replace it with a new one of the same colour.
This method of testing car electrical fuses will work for any car equipment.
The radio/casette player in a peugeot 106 comes with a 4 digit preset which is input by pressing 1,2,3 and 4....the combination is provided by Peugeot itself, if u have lost the combination then u might have to pay £30 to Peugeot to get it unlocked, it'll be cheaper to buy a new stereo.
Well remove the radio and there is a master reset on the radio. But if you just remove the positive terminal from the battery it should reset it. And you don't have to remove the radio to do that
someone hooked up the radio wrong...rewire... if its the original radio...haven't a clue.. Dave answer you have no constant live running to the memory pary of the radio all it takes is to change 2 wires over unfortunatly i forgot which 2 but any mechanic could advise
Rikki Martinez, a radio personality known for her work at Power 106, left the station in 2021 after several years on air. Her departure was part of a larger reshuffling within the station, and she has since pursued other opportunities in the entertainment industry. Martinez has remained active on social media and continues to engage with her fan base.
http://hertenberger.co.za/?p=420Talk Radio 702 is available on both 106 FM and 92.7 FMIf you are in the greater Tshwane area, Midrand, or northern Joburg, the 106 signal is probably better for you, while 92.7 covers the greater Joburg area.Wherever you are, take the time to check and listen, to see whether 106 or 92.7 is best for you. If your car radio is RDS enabled it will display "Talk 702" and will automatically choose the best signal.In parts of the country, night-time medium wave listeners may be able to hear the programmes shared with 567 CapeTalk by tuning to 567 medium wave. This coverage is limited.
just behind the glove box to the left.
In the Peugeot 106 Independence, the fuse box is typically located in the cabin, on the driver's side. It can be found beneath the dashboard, near the steering column. You may need to remove a cover or panel to access it. Additionally, there is often a secondary fuse box located in the engine compartment.
It will be fuse number F30 with a rating of 15 A. There is a diagram in the owner's manual listing what each fuse is for, and where it is located.
10
F5 20a fuse
The fuse box on a Peugeot 106 Independence is typically located in the engine compartment, near the battery, or under the dashboard on the driver's side. To access the interior fuse box, you may need to remove a cover or panel. Always consult the owner's manual for your specific model for precise locations and diagrams.
Owners hand book.
mate the fuse for the horn is behind the glove box its a green 30 amp fuse witch is marked number F5 in the peugeot 106 hand book on page 76. good luck mate
f8 20A also operates clock, luggage compartment lighting, roof lamp, & central locking :)
The fuse for the fuel gauge in a Peugeot 106 is typically located in the fuse box under the dashboard on the driver's side. You'll need to remove the cover to access the fuses. Look for a fuse labeled for the instrument cluster or fuel gauge, usually a small blade fuse. If you're unsure, consult the vehicle's owner manual for the exact location and specifications.
All the fuses are located to the side of the steering wheel. Remove flip down panel and search for the fuse using the fuse diagram located on the back of the flip down panel.
The fuse for the petro gauge can be found in the fuse box. The fuse will be labeled as the instrument panel fuse.