answersLogoWhite

0

the rancher 420 does not have a cvt so there will be no cvt intake

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Music & Radio

How fast can a 2008 Honda Rancher 420 4x4 go What is the torque like?

Mine went about 55mph The torque is very excellent, so if you want one, or have one, you'll be very happy with it.


What is the proper tire pressure for a 2008 Honda rancher ATV?

Look at the recommended tire pressure stated on the sidewall of the tire. It states the tire size and gives you the recommended tire pressure. Are you serious with this question?^^^ What an idiotic response! Since you obviously do not know the right answer, why post anything at all? The sidewall of the tires states to check in the user manual for the proper PSI, which is hardly helpful. I usually put around 14 PSI in the rear tires and about 12 PSI in the front. I cannot find the user manual for my 2001 Rancher but 14/12 is what a fellow Rancher owner told me.STRAIGHT FROM THE OWNER'S MANUAL! I HAVE a Honda 420 with MAXXIS M977 (front) and M978 (rear). The OWNER's manual says the correct/recommended tiure pressure is 4.4 psi (30kPa) front and rear. They actually supplied a small, low range tire gauge so I could get it right. The first answer is so far off the mark it is not even funny.


How do you unlock 2008 Honda Fit radio code?

To unlock the radio code for a 2008 Honda Fit, you typically need the vehicle's serial number, which can be found on the radio itself or in the owner's manual. You can retrieve the serial number by removing the radio from the dashboard. Once you have the serial number, you can either check the owner's manual for the code or contact a Honda dealership with the vehicle's VIN and radio serial number for assistance in obtaining the code.


How do you find the Honda CR-V radio code?

Try referring to your owner's manual! you also have the second option of contacting the customer service department at Honda Check the link below: Just press radio number #1 and 6 at the same time and the radio code will appear.


How do you get a radio code for 2008 Honda Pilot?

The radio's serial number is necessary when you contact Honda (800 number or local dealer) and request the code number to that particular radio. I don't own a Pilot but I've heard that some Honda radios will display the radio's serial number when you hold down buttons 1 and 6 simultaneously and turn it on.

Related Questions

Where is the location of the starter on a 2008 Honda accord?

for a 4 cylinder , its located under the intake manifold.


Where is battery located on 2008 Honda rancher 420 es?

the battery is behind the seat under the black cover you will also see the fuse box


How fast can 2008 Honda 420 rancher go?

mine goes 86Km


Where is the serial number located on a 2008 Honda rancher?

On a 2008 Honda Rancher, the serial number, also known as the Vehicle Identification Number (VIN), is typically located on the frame near the front of the vehicle, specifically on the right side near the steering column. It may also be found on a sticker or plate attached to the frame, often just above the right front wheel. Additionally, the VIN can be located on the engine casing.


Where is the 12 volt plug in on the 2008 Honda rancher?

On the 2008 Honda Rancher, the 12-volt plug is typically located near the handlebars, often on the front side of the body panel or near the instrument cluster. It can also be found under the seat or in the rear storage compartment, depending on the specific model and configuration. For precise locations, it's best to refer to the owner's manual.


Where is the oil filter on your 2008 Honda Rancher At?

On a 2008 Honda Rancher, the oil filter is located on the right side of the engine, near the front, below the cylinder head. It is a cylindrical component that is typically covered by a plastic guard. To access it, you may need to remove the guard and use an oil filter wrench for easier removal and installation. Always ensure to check your owner's manual for specific details and recommendations.


How many quarts of oil does a 2008 Honda rancher 420 hold?

The 2008 Honda Rancher 420 typically holds about 3.2 quarts of oil when using an oil filter and approximately 2.9 quarts without the filter change. It's always best to check the owner's manual for the specific model to ensure accurate maintenance practices.


Where is the iat sensor of a 2008 Nissan Titan located?

on the air intake


Where is the fuel pump reset switch located in the 2008 Honda crv?

There is no such reset button on your Honda CRV.


How do you remove spark arrestor on a 2008 Honda rancher es?

To remove the spark arrestor on a 2008 Honda Rancher ES, first ensure the ATV is turned off and cooled down. Locate the exhaust system and remove the screws or bolts securing the spark arrestor cover. Carefully pull out the spark arrestor from the muffler, taking care not to damage any components. After removal, reattach the cover securely.


When did Monster Rancher DS happen?

Monster Rancher DS happened in 2008.


Where is the IAT Sensor located on a 2008 Honda Odyssey?

in my bam b bam