0
Look at the recommended tire pressure stated on the sidewall of the tire. It states the tire size and gives you the recommended tire pressure. Are you serious with this question?
^^^ What an idiotic response! Since you obviously do not know the right answer, why post anything at all? The sidewall of the tires states to check in the user manual for the proper PSI, which is hardly helpful. I usually put around 14 PSI in the rear tires and about 12 PSI in the front. I cannot find the user manual for my 2001 Rancher but 14/12 is what a fellow Rancher owner told me.
STRAIGHT FROM THE OWNER'S MANUAL! I HAVE a Honda 420 with MAXXIS M977 (front) and M978 (rear). The OWNER's manual says the correct/recommended tiure pressure is 4.4 psi (30kPa) front and rear. They actually supplied a small, low range tire gauge so I could get it right. The first answer is so far off the mark it is not even funny.
What else can I help you with?
Where is the CVT intake located at on a 2008 Honda rancher 420?
the rancher 420 does not have a cvt so there will be no cvt intake
How fast can a 2008 Honda Rancher 420 4x4 go What is the torque like?
Mine went about 55mph The torque is very excellent, so if you want one, or have one, you'll be very happy with it.
How do you unlock 2008 Honda Fit radio code?
To unlock the radio code for a 2008 Honda Fit, you typically need the vehicle's serial number, which can be found on the radio itself or in the owner's manual. You can retrieve the serial number by removing the radio from the dashboard. Once you have the serial number, you can either check the owner's manual for the code or contact a Honda dealership with the vehicle's VIN and radio serial number for assistance in obtaining the code.
How do you work the radio control knobs for a 2008 Honda Element CD Radio?
Without copying out the whole car handbook. I suggest reading the handbook that should have come with the car when you purchased it. Most people keep it in the glove compartment.
How do you find the Honda CR-V radio code?
Try referring to your owner's manual! you also have the second option of contacting the customer service department at Honda Check the link below: Just press radio number #1 and 6 at the same time and the radio code will appear.
Where is the CVT intake located at on a 2008 Honda rancher 420?
the rancher 420 does not have a cvt so there will be no cvt intake
How fast can 2008 Honda 420 rancher go?
mine goes 86Km
How many quarts of oil does a 2008 Honda rancher 420 hold?
The 2008 Honda Rancher 420 typically holds about 3.2 quarts of oil when using an oil filter and approximately 2.9 quarts without the filter change. It's always best to check the owner's manual for the specific model to ensure accurate maintenance practices.
What does a 2008 Honda rancher 420 warning light mean?
In a 2008 Honda Rancher 420, a warning light typically indicates a potential issue with the vehicle's systems. This could relate to the engine, oil pressure, or other critical components. It's essential to consult the owner's manual for specific light meanings and take appropriate action, such as checking fluid levels, or seeking professional assistance if the light persists. Ignoring warning lights can lead to more severe damage or safety issues.
What is the correct tire pressure for a 2008 Honda civic?
30 PSI
Where is battery located on 2008 Honda rancher 420 es?
the battery is behind the seat under the black cover you will also see the fuse box
Where is the 12 volt plug in on the 2008 Honda rancher?
On the 2008 Honda Rancher, the 12-volt plug is typically located near the handlebars, often on the front side of the body panel or near the instrument cluster. It can also be found under the seat or in the rear storage compartment, depending on the specific model and configuration. For precise locations, it's best to refer to the owner's manual.
How do you reset the tire pressure monitor on a 2008 Honda?
buy a new car
What does the exclamation light on a 2008 Honda Accord mean?
Low tire pressure.
Where is the oil filter on your 2008 Honda Rancher At?
On a 2008 Honda Rancher, the oil filter is located on the right side of the engine, near the front, below the cylinder head. It is a cylindrical component that is typically covered by a plastic guard. To access it, you may need to remove the guard and use an oil filter wrench for easier removal and installation. Always ensure to check your owner's manual for specific details and recommendations.
How do you remove spark arrestor on a 2008 Honda rancher es?
To remove the spark arrestor on a 2008 Honda Rancher ES, first ensure the ATV is turned off and cooled down. Locate the exhaust system and remove the screws or bolts securing the spark arrestor cover. Carefully pull out the spark arrestor from the muffler, taking care not to damage any components. After removal, reattach the cover securely.
When did Monster Rancher DS happen?
Monster Rancher DS happened in 2008.
