people put tape on their drum heads since it muffles and reduces resonance and reverberations. think of it like a silencer on a gun. most of the time, if a drum needs to have tape on it, it is because the drum is low quality
Brian Jones of The Rolling Stones
It is called as syhia. it is usually made of gum, soot & iron fillings.
a tape recording of AC/DC's "It's a Long Way to the Top (If You Wanna Rock 'n' Roll)" is played. then a tape recording "The Ecstasy of Gold" by Ennio Morricone plays and then the band starts playing/
The two up top are called the high and low toms. The one on the floor is not called the bass drum, but it is called the floor tom.
Steel Drums take about a week of hard labour to make Steel Drums take about a week of hard labour to make
no you don't tape the top of your lacrosse shaft........you just tape just lower region for better grip and reminding you where to put your hands.
A hat size is measured by using a tape measure. Put the tape measure at the top of the forehead by the hairline. Wrap the tape measure around the head.
well, i put about 6 inches on the bottom and top and a ring where i like to put my hand when i pass
Adhesive, backing paper and top paper or tape. The tape is coated and backing put on when run through a machine with an overhead oven to cure. Then it is slit into rolls on another machine.
You could tape it to the wall or put it on top of your flat screen. You would just have to stand farther away if you put it on top.
Clear grip tape is REALLY good if the top of your deck has graphics on it.. or .. What I've done on a couple of decks I've put together- put stickers on the top of the deck and lay over it with clear grip tape.. the effect is cool with the stickers showing through the tape and the decals stay somewhat protected too.. The down side of clear grip is that if it gets street crud all on it - it is a pain to clean..
Adhesive, backing paper and top paper or tape. The tape is coated and backing put on when run through a machine with an overhead oven to cure. Then it is slit into rolls on another machine.
first you take two 6 or 7 inch pieces of duct tape and then you put those together then you put on a top and then your just about done you just add on what you like and your basically going to have a unique and gorgeous purse.
u get the 2 magazines and u get lots of duck tape and stick the tape on both ends then go other with lots of masking tape then with some of that brown tape and cover the hole where the bulut comes out then put the normal magazine on the top top and slide it in like u always do and it should shoot 12 bullets but not at once
You shouldn't do that. I'm sure DOT would put you out of service if they saw that.
You can put a sticky tape substance on top of the car, or keep the cat inside.
NOOOOOOOO. whats better is if you put her in a cardboard box with the top open and a screen on top so she cant get out and have her babies somewhere else, and tape the screen with duck tape.(put old blancket or towel on bottom so babies wont die.