You could tape it to the wall or put it on top of your flat screen. You would just have to stand farther away if you put it on top.
The cam position sensor is inside the distributor, under the rotor. The crank position sensor is through the top of the bell housing, behind the passenger side cylinder head, under the transmission tube.The cam position sensor is inside the distributor, under the rotor. The crank position sensor is through the top of the bell housing, behind the passenger side cylinder head, under the transmission tube.
It is the sensor in the distributor under the cap and rotor.It is the sensor in the distributor under the cap and rotor.
The cam position sensor is attached to the distributor, under the distributor cap. It is held in place with two screws.
The camshaft position sensor is right under the power steering pump. Remove the power steering pump to access the sensor.
The camshaft position sensor on a 95 Dodge 2500 3.9 is located inside the distributor, under the rotor.
It is on the part under the hood that the cables hook to. It is called an APPS: accelerator pedal position sensor.
The camshaft position sensor on a 2001 Dodge Ram 5.2 is inside the distributor, under the rotor.
In the front under the starter you have to get to it from under the car
under the ac compressor
Under the distributor cap.
Under the hood
The camshaft position sensor, also referred to as the TDC sensor, is located under the same cover as the timing belt. It is a good idea to check the condition of the timing belt and water pump if you are changing the camshaft position sensor.